555136
5
Zoom out
Zoom in
Previous page
1/37
Next page
7
GB
Finishing sander
INTENDED USE
This tool is intended for dry sanding and nishing of
wood, painted surfaces, plastic and ller
TECHNICAL SPECIFICATIONS 1
PRODUCT ELEMENTS 2
1 On/Off switch
2 Switch locking button
SAFETY
WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock,
re and/or serious injury.
Avoid damage that can be caused by screws, nails
and other elements in your workpiece; remove them
before you start working
Always keep the cord away from moving parts of the
tool; direct the cord to the rear away from the tool
• When you put away the tool, switch off the motor
and ensure that all moving parts have come to a
complete standstill
Use completely unrolled and safe extension cords
with a capacity of 16Amps (U.K. 13Amps)
In case of electrical or mechanical malfunction,
immediately switch off the tool and disconnect the
plug
SBM Group can assure awless functioning of the
tool only when original accessories are used
• This tool should not be used by people under the
age of 16 years
The noise level when working can exceed 85 dB(A);
wear ear protection
If the cord is damaged or cut through while working,
do not touch the cord, but immediately disconnect
the plug
Never use tool when cord is damaged; have it re-
placed by a quali ed person
Always check that the supply voltage is the same as
the voltage indicated on the nameplate of the tool
(tools with a rating of 230V or 240V can also be con-
nected to a 220V supply)
This tool is not suitable for wet sanding
Do not work materials containing asbestos (asbes-
tos is considered carcinogenic)
When sanding metal, sparks are generated; do not
use dustbox and keep other persons and combusti-
ble material from work area
Do not touch the moving sanding sheet
Do not continue to use worn, torn or heavily clogged
sanding sheets
Wear protective gloves, safety glasses, close- tting
clothes and hair protection (for long hair)
Take protective measures when during work dust
can develop that is harmful to one’s health, combus-
tible or explosive (some dusts are considered carci-
nogenic); wear a dust mask and work with dust/chip
extraction when connectable
Always disconnect plug from power source before
making any adjustment or changing any accessory
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ON-
LY):
Do not connect the blue (= neutral) or brown (= live)
wire in the cord of this tool to the earth terminal of
the plug
If for any reason the old plug is cut off the cord of
this tool, it must be disposed of safely and not left
unattended
the dust suction requires the use of perforated sand-
ing sheets
perforation in sanding sheet should correspond with
perforation in sanding foot
replace worn sanding sheets in time
• always use the tool with the total sanding surface
covered with sanding paper
before the sanding surface reaches the workpiece,
you should switch on the tool
before switching off the tool, you should lift it from
the workpiece
do not apply too much pressure on the tool; let the
sanding surface do the work for you
Your machine is double insulated in accord-
ance with EN60745; therefore no earthwire is
required.
MAINTENANCE
Make sure that the machine is not live when
carrying out maintenance work on the motor.
Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots
free from dust and dirt.If the dirt does not come off use
a soft cloth moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
The machine requires no additional lubrication.
Should a fault occur, e.g. after wear of a part, please
contact your local SBM Group dealer.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these
materials to the appropriate recycling locations. Take
your unwanted machines to your local SBM Group
dealer. Here they will be disposed of in an environmen-
tally safe way.
English
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bort BS-150N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bort BS-150N in the language / languages: All languages as an attachment in your email.

The manual is 3,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info