555171
7
Zoom out
Zoom in
Previous page
1/42
Next page
7
GB
Router
INTENDED USE
The tool is intended to route grooves, edges, pro les and elon-
gated holes in wood, plastic and light building materials as well
as to copy-route
TECHNICAL SPECIFICATIONS 1
PRODUCT ELEMENTS 2
1 On/off switch
2 Handle
3 Router base
4 Locking bolt for parallel guide
5 Opening for parallel guide
6 Collet nut
7 Spindle lock
8 Revolver-depth stop
9 Locking bolt depth stop
10 Depth stop
11 Clamping lever
12 Scale cutting depth
13 Adjusting wheel electronic speed control
14 Height adjusting button
SAFETY
WARNING! Read all instructions. Failure to follow all instructions
listed below may result in electric shock, re and/or serious in-
jury.
GENERAL
This tool should not be used by people under the age of 16
years
Always disconnect plug from power source before making any
adjustment or changing any accessory
ACCESSORIES
SBM Group can assure awless functioning of the tool only
when original accessories are used
Use only accessories with an allowable speed matching at
least the highest no-load speed of the tool
Do not use damaged or deformed router bits
Only use sharp router bits
Protect accessories from impact, shock and grease
Only use high speed steel (HSS) or carbide-tipped (CT) router
bits with this tool
BEFORE USE
Avoid damage that can be caused by screws, nails and other
elements in your workpiece; remove them before you start
working
Always check that the supply voltage is the same as the volt-
age indicated on the nameplate of the tool (tools with a rating
of 230V or 240V can also be connected to a 220V supply)
Do not work with materials containing asbestos
Clamp the workpiece in case it does not remain stationary
from its own weight
Do not clamp the tool in a vice
Use completely unrolled and safe extension cords with a ca-
pacity of 16 Amps (UK 13 Amps)
The noise level when working can exceed 85 dB(A); wear ear
protection
Wear a dust protection mask when working with materials
which produce dust that is detrimental to health; inform your-
self beforehand about the materials to be worked on
Be sure tool is switched off when plugging in
DURING USE
Always keep the cord away from moving parts of the tool; di-
rect the cord to the rear, away from the tool
Never use tool when cord or base-plate (=protective guard) is
damaged; have it replaced by a quali ed person
Keep hands and ngers away from router bit when tool is
switched on
Never exceed maximum cutting depth of router bit while cut-
ting
In case of electrical or mechanical malfunction, immediately
switch off the tool and disconnect the plug
In case the router bit is blocked, resulting in jerking forces on
the tool, immediately switch off the tool
In case of current interruption or when the plug is accidentally
pulled out, immediately switch off the tool in order to prevent
uncontrolled restarting
Do not apply so much pressure on the tool that it comes to a
standstill
AFTER USE
• After nishing the work, lift lever, guide the tool back into the
upper starting position, and switch off the tool
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
Do not connect the blue (= neutral) or brown (= live) wire in the
cord of this tool to the earth terminal of the plug
If for any reason the old plug is cut off the cord of this tool, it
must be disposed of safely and not left unattended
3 Mounting adapter plate (for copying with a template)
4 Mounting rip fence
5 Circular guide
6 Mounting/removing router bits
7 Speed control
8 Changing collet
9 Mounting/removing of vacuum cleaner adapter
10 Operating the tool
Your machine is double insulated in accordance with
EN 50144; therefore no earthwire is required.
MAINTENANCE
Make sure that the machine is not live when carrying
out maintenance work on the motor.
Regularly clean the machine housing with a soft cloth, prefer-
ably after each use. Keep the ventilation slots free from dust and
dirt.If the dirt does not come off use a soft cloth moistened with
soapy water. Never use solvents such as petrol, alcohol, ammo-
nia water, etc. These solvents may damage the plastic parts.
The machine requires no additional lubrication.
Should a fault occur, e.g. after wear of a part, please contact
your local SBM Group dealer.
ENVIRONMENT
In order to prevent the machine from damage during transport,
it is delivered in a sturdy packaging. Most of the packaging ma-
terials can be recycled. Take these materials to the appropriate
recycling locations. Take your unwanted machines to your local
SBM Group dealer. Here they will be disposed of in an environ-
mentally safe way.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bort BOF-1080N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bort BOF-1080N in the language / languages: All languages as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info