555099
7
Zoom out
Zoom in
Previous page
1/24
Next page
7
CLEANING AND CARE
WARNING!
Before carrying out any maintenance work on
the unit, make sure the humidi er is turned
off, unplugged and wait till all parts cool
down.
To clean the humidi er do not use abrasive powders
or strong solvents.
To avoid electric shock or unit breakdown do not im-
merse the humidi er in water.
It is recommended to remove and clean calcium
build up regularly from the humidi er.
In order to maintain the appearance of a humidi er,
clean it with a soft cloth soaked in warm water.
Before starting, make sure that the humidi er and all
parts are dry.
DISPOSAL
When disposing of any part of your equipment take ex-
tra measures to prevent environmental harm. It is not
recommended to burn any parts of the unit or product
package. Burning any of it will emit hazardous sub-
stances that may be harmful to the environment, hu-
man health and animals.
Life of product is 2 years.
By using this product in the recommended areas and
maintaining it regularly as set indicated in this manual,
by following all the rules of safety the life of the unit
may be extended much more than manufactures rec-
ommended time.
Manufacture reserves the right to make any changes to
the construction or complete set of the product without
deteriorating the performance of the product.
WARNING!
Use with caution in children’s rooms and if
anybody has allergic reactions.
WARNING!
When you use medicine, you should consult
your doctor.
WARNING!
Do not temper or make any changes to the
construction of the unit. Do not service the
unit by yourself or by unauthorized person-
nel, as well as non-compliance with the requirements
for the use and maintenance, as described in this man-
ual. Any of the above will terminate the warranty of this
product.
SERVICE AND MAINTENANCE
1. Check the unit for damage. If damaged, do not use
the appliance.
WARNING!
if the humidi er was subject to negative tempera-
tures, prior to use is recommended to keep at room
temperature for 30 minutes.
Use a humidi er at an indoor temperature of +5 to
+40 ° C, with relative humidity less than 80%.
2. Remove the water tank from the housing.
3. Turn the tank and unscrew the cap by turning it coun-
terclockwise. Fill the container with water and screw
the lid by turning it clockwise.
4. Place the lled tank into the housing.
5. Install the unit on a at, clean surface.
6. Connect the power cord to the wall socket.
7. Turn on the humidi er by turning the knob clockwise.
Set the intensity of the water spray by turning the knob
to the desired value.
8. To disconnect the unit, turn the knob to “Off.” And
unplug the appliance.
WARNING!
To avoid damage to the humidi er do not op-
erate without water.
WARNING!
While lling the humidi er with water, hold it
with both hands.
WARNING!
While the humidi er is working, please do not
touch any parts that contain water.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bort BLF-210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bort BLF-210 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info