555176
6
Zoom out
Zoom in
Previous page
1/40
Next page
6
GB
FR
Die grinder
INTENDED USE
This tool is intended for high-precision grinding, sanding, cut-
ting, engraving, polishing and drilling in different materials
TECHNICAL SPECIFICATIONS 1
PRODUCT ELEMENTS 2
1. On/off switch
2. Spindle-lock button
3. Collet
4. Collet nut
5. Speed selection wheel
SAFETY
WARNING! Read all instructions. Failure to follow all instruc-
tions listed below may result in electric shock, re and/or
serious injury.
This tool should not be used by people under the age of 16
years
Only use this tool for applications without the use of water
Always disconnect plug from power source before making
any adjustment or changing any accessory
ACCESSORIES
SBM Group can assure awless functioning of the tool only
when original accessories are used
Use only accessories recommended by SBM Group
For mounting/using non-SBM Group accessories observe
the instructions of the manufacturer concerned
Use only accessories with an allowable speed matching at
least the highest no-load speed of the tool
Do not use damaged, deformed or vibrating accessories
Handle and store grinding/cutting discs carefully to avoid
chipping and cracking
Protect accessories from impact, shock and grease
Never use grinding discs over 32 mm (1 1/4”) Ø
Never use drill bits over 3.2 mm (1/8”) Ø
Never use a cutting disc for side grinding
Never use reducors or adaptors to t large-hole grinding/ cut-
ting discs
BEFORE USE
Always check that the supply voltage is the same as the volt-
age indicated on the nameplate of the tool (tools with a rating
of 230V or 240V can also be connected to a 220V supply)
Do not work with materials containing asbestos
Clamp the workpiece in case it does not remain stationary
from its own weight
Use completely unrolled and safe extension cords with a ca-
pacity of 16 Amps (UK 13 Amps)
Wear protective glasses and gloves, hearing protection, a
dust mask, and sturdy shoes; when necessary, also wear an
apron
Wear a dust protection mask when working with materials
which produce dust that is detrimental to health; inform your-
self beforehand about the materials to be worked on
Ensure that the collet size corresponds with the shaft size of
the accessory
Be sure tool is switched off when plugging in
English
DURING USE
Always keep the cord away from moving parts of the tool;
direct the cord to the rear, away from the tool
Never use tool when cord is damaged; have it replaced by a
quali ed person
Never use spindle lock while tool is running (damage due to
improper handling will be excluded from the guarantee)
Keep hands away from rotating accessories
When grinding metal, sparks are generated; keep other per-
sons and combustible material from work area
Keep ventilation slots uncovered
In case of electrical or mechanical malfunction, immediately
switch off the tool and disconnect the plug
AFTER USE
The accessory continues to rotate for a short time after the
tool has been switched off
Before you put down the tool, switch off the motor and ensure
that all moving parts have come to a complete standstill
After switching off the tool, never stop the rotation of the ac-
cessory by a force applied against it
Store tool in locations where temperature will not exceed
50°C
WHEN CONNECTING NEW 3-PIN PLUG (U.K.
ONLY):
Do not connect the blue (= neutral) or brown (= live) wire in
the cord of this tool to the earth terminal of the plug
If for any reason the old plug is cut off the cord of this tool, it
must be disposed of safely and not left unattended
Your machine is double insulated in accordance with
EN 50144; therefore no earthwire is required.
MAINTENANCE
Make sure that the machine is not live when carrying
out maintenance work on the motor.
Regularly clean the machine housing with a soft cloth, prefer-
ably after each use. Keep the ventilation slots free from dust and
dirt.If the dirt does not come off use a soft cloth moistened with
soapy water. Never use solvents such as petrol, alcohol, ammo-
nia water, etc. These solvents may damage the plastic parts.
The machine requires no additional lubrication.
Should a fault occur, e.g. after wear of a part, please contact
your local SBM Group dealer.
ENVIRONMENT
In order to prevent the machine from damage during transport,
it is delivered in a sturdy packaging. Most of the packaging ma-
terials can be recycled. Take these materials to the appropriate
recycling locations. Take your unwanted machines to your local
SBM Group dealer. Here they will be disposed of in an environ-
mentally safe way.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bort BCT-170-M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bort BCT-170-M in the language / languages: All languages as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info