Manual Boretti VZGF 90 (page 77 of 100) (English, German, Dutch, French, Spanish, Spanish)

76148

Zoom out

Zoom in

1/100

For the Installer

General Installation Instructions

Your Boretti must be installed by a qualiﬁ ed tech-

nician according to legal/locally applicable codes

and ordinances.

Before you start installation or reparation work,

make sure that the range cooker is not connected

to the power source.

Your Boretti can be installed against a wall that is

higher than the counter, such as a tall appliance

cabinet or a closed wall, at a distance of at least

50 mm from the side of the range cooker, as illu-

strated in Drawing A. There must be at least 650

mm of space between the cooktop and any shelf

or hood placed above it.

Your Boretti range cooker has a standard height

of approximately 91 cm. If your Boretti has been

ﬁ tted with round adjustable legs, you can also

purchase these in a taller version. The range

cooker can then be adjusted to a height between

91 and 97 cm. It is recommended to align the

cooktop with the top of the counter. We also re-

commend that the range cooker be perfectly level

in order to ensure proper functioning.

The strip with ventilation slots included with your

range cooker is only mandatory for use with a

ventilated gas oven, and only when it is closed off

on the upper–back side by tiles or a wall. You do

not need to use these for a model with a regular

electric oven; that range cooker can be placed

directly against a back wall or tiles.

In order to ensure proper functioning, we advise

you to use your range cooker in a well–ventilated

area. This is especially important for range coo-

kers that are connected to bottled gas (butane/

propane). Butane/propane (bottled gas) is heavier

than air. As a result, the gas will sink low to the

ground (only in case of leakage). Therefore, there

must be sufﬁ cient ventilation to disperse gas at

ground level. Under no circumstances may the

gas bottles be placed below the living area (base-

ment/crawl space). This also applies to empty or

half–empty gas bottles.

Electrical Connection

Check whether voltage and capacity agree with

the features mentioned on your Boretti’s type

plate. Under no circumstances may this plate be

removed. The fuses and home mains voltage in-

stallation must comply with the range cooker’s

requirements. The connection to the electrical

supply may be either ﬁ xed, or a plug and socket.

In the latter case, the plug and socket outlet must

comply with applicable regulations. The connec-

tion must be grounded, regardless of type. Befo-

re connecting, make sure the electricity source is

properly grounded. Avoid use of reducers, adap-

tors, extension cables or by–passes.

Caution:

See Page 98 for the correct installation diagrams.

All six screws must always be well tightened.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti VZGF 90 in the language / languages: English, German, Dutch, French, Spanish, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti VZGF 90 Manual

Product: