324228

Boretti vqe-104 Manual

93
Zoom out
Zoom in
Previous page
1/100
Next page
93
NL
FR
ES
EN
Adjusting the Gas Burners
You can easily adjust or trim the gas burners
yourself. You can do this if, for example, if the
range has been converted to another type of gas,
or you would like stronger or weaker gas flow.
Ignite one burner at a time, and switch to the
lowest position. Pull out the knob of the burner
in question, and place a small screwdriver in the
opening just above the pin of the knob (Fig. 11).
Right above the pin, you will see a small brass
screw which you will use to adjust the gas flow.
Turn to the left for a higher flame, and to right for
a lower one.
Cast Iron Grill Plate
The cast iron grill plate is ideal for roasting meat.
Position the grill plate on one of the burner grates
which is suitable for your type of grill plate, and
switch on the burner. After about 10 minutes the
grill plate will be thoroughly heated and ready for
use. It is best to clean the grill plate with some
suds and hot water.
Cleaning the
Cooktop
Aluminum Burner Base
The aluminum bases (Fig. 10a) will lose their ori-
ginal sheen after use. This is normal. The alumi-
num burner bases can be cleaned with a scrub-
bing pad.
Brass Flame Distributor Ring
The brass flame distributors (Fig. 10d) will nor-
mally discolor slightly after use. The flame distri-
butor rings can be cleaned with a scrubbing pad.
Burner Grates and Burner
The cast iron burner grates and caps can also
discolor slightly after use. It is best to clean them
with a mild detergent and brush. After cleaning,
make sure to dry the parts very carefully to pre-
vent rusting. The cast iron parts can be treated
with oil occasionally.
Drip Tray
The range cooker drip tray must never be scrub-
bed. It is best to clean it with a mild detergent
and cloth. Avoid excessive water use near the
white spark ignition of the gas burners.
Caution: never clean individual range cooker parts
in the dishwasher.
Figure 11
… 93 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti vqe-104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti vqe-104 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info