Manual Boretti vpnri 94 coloured (page 87 of 100) (English, German, Dutch, French, Spanish, Spanish)

327136

Zoom out

Zoom in

1/100

Dismantling the Oven Glass Panel

In order to remove the glass panel from a Boretti

oven door, take the following steps:

Remove the oven door according to the instruc-

tions above. Unscrew the two stainless steel

screws (Fig. 5) at the top and the bottom of the

glass panel, and gently remove the glass panel

(Fig. 6). You can now clean it thoroughly. When

you reinstall the panel, make sure that the stain-

less steel strips clamp the panel properly.

Removing the Inside Panels from the

Oven

In order to remove the inside panels from the

oven, follow these steps:

• open the oven door completely

• remove all racks and baking sheets from the

oven cavity

There are two large screws that you can unscrew

on the sides, after which the side panels can be

easily removed.

Cleaning the Oven Cavity(s)

Wait until the oven has cooled down completely,

then clean it with lukewarm water and a mild clea-

ning agent. Never use knives, steel–wool pads or

other abrasive products or objects for cleaning

purposes. This might damage the ﬁ nish on the

inside of your oven. Make sure that food spills are

removed after every cooking session, in order to

prevent damage. An additional advantage of regu-

lar cleaning is that there will be fewer unpleasant

odors the next time you use the oven.

Using the Built–In Thermometer

Some range cookers are ﬁ tted with a so–called

built–in thermometer. When the oven is cold,

insert the thermometer’s probe into the dish,

and the plug into a special connection that is on

the left side of the oven (Fig. 7). Two values will

appear on the display: The value on the left will

indicate the temperature of the thermometer,

and the value on the right will indicate the pre-

set temperature, which can be adjusted using the

+ and – button on the control panel. When the

preset temperature has been reached, the oven

will switch off and you will be warned by an audio

signal. You can switch the sound off by pressing

on any button on the operating panel.

Remove the thermometer from the connection af-

ter the oven has cooled down. Of course you can

remove the probe from the dish earlier, so that

the dish can be taken from the oven. The oven

thermometer has a reach from 0 – 99°C.

Caution: insert the thermometer into the center

of the dish, and avoid bones or fatty areas in or-

der to achieve a more accurate reading.

See Page 95 for a cooking chart.

Figure 5

Figure 6

Figure 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti vpnri 94 coloured in the language / languages: English, German, Dutch, French, Spanish, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti vpnri 94 coloured Manual

Product: