69423
78
Zoom out
Zoom in
Previous page
1/100
Next page
78
Boretti is not liable for damage to persons or
objects as a result of non–compliance or partial
compliance with the instructions listed above, or
as a result of modifi cations made to the range
cooker.
Caution: All range cookers are factory delivered
with a mono–phase connection in the connection
block at the back of the range cooker. If connec-
tion is made to multiple phases, you must comply
with (local) codes and ordinances.
Gas Connection
The connection with a rubber tube that complies
with applicable regulations must be made in such
a way that the length of the tube is not more than
1.5 meters; make sure the tube does not touch
moving parts, or has a kink. Before using the
range cooker, always check whether the following
requirements have been met:
it must be possible to inspect the supply line
along its entire length (max. 1.5 m).
the supply line must not be subject to tensile
forces or make sharp turns.
the supply line must not touch sharp objects
or corners.
the supply line must not touch walls heated to
more than 50°C at any point.
Caution: After connecting your Boretti, use soap
suds to check for leaks. Never do this with a
ame.
Caution: A gas tube has a limited lifespan. Make
sure you replace it with a new one in a timely fa-
shion.
Boretti recommends connecting your range coo-
ker with a fl exible metal GIVEG tube which can be
purchased from Boretti. The maximum length of
these tubes is 1 meter and they have an unlimited
lifespan.
Caution: If your Boretti is connected to mains gas
using a fi xed (copper) line, you must always use a
ber gasket (Figure 1).
Caution: For range cookers placed in Belgium the
optional Boretti gas line cannot be used. In Bel-
gium it is mandatory to use a BVG approved gas
line.
Figure 1
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti VP 96 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti VP 96 in the language / languages: English, German, Dutch, French, Spanish, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Boretti VP 96

Boretti VP 96 User Manual - English, Dutch, French, Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info