74684
97
Zoom out
Zoom in
Previous page
1/100
Next page
97
NL
FR
ES
EN
Malfunction Possible Cause Solution
The burner switches off as
soon as the knob is released.
The burner switches off as
soon as the knob is released
after 10 seconds.
The burner switches off in the
lowest position.
The spark ignition keeps
clicking.
The thermocouple is not hot
enough.
The knob has not been pushed
down far enough.
The lowest position has been
adjusted too low, so that the
thermocouple is not hot enough.
The ignition switch is wet (be-
cause of food spills or cleaning).
After the flame has been lit,
keep the knob firmly pressed
down for another 8 to 10
seconds.
Try again, and keep the knob
firmly pressed down.
Set the lowest setting a little
higher, see section about
adjusting the lowest position.
The ignition will continue to
click until all the moisture has
dried up. This is not harmful,
but it is annoying. In order
to have the switch dry more
quickly, it will help to switch
on the oven to its highest
temperature.
Ceramic Cooktop:
Malfunction Possible Cause Solution
Half of the zones do not work.
Half of the zones do not work.
One of the groups has not been
connected properly.
Something is wrong with one of
the fuses.
Check the connection and
tighten the screws.
Replace the fuse in question in
the fuse box.
If your malfunction has not been solved using the overview above, you can report
it on the Boretti website. You can also call 0900 235 26 73.
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti VFP 94 IX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti VFP 94 IX in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info