Manual Boretti VFN 150 (page 78 of 100) (English, German, Dutch, French, Spanish)

74704

Zoom out

Zoom in

1/100

Boretti is not liable for damage to persons or

objects as a result of non–compliance or partial

compliance with the instructions listed above, or

as a result of modiﬁcations made to the range

cooker.

Caution: All range cookers are factory delivered

with a mono–phase connection in the connection

block at the back of the range cooker. If connec-

tion is made to multiple phases, you must comply

with (local) codes and ordinances.

Gas Connection

The connection with a rubber tube that complies

with applicable regulations must be made in such

a way that the length of the tube is not more than

1.5 meters; make sure the tube does not touch

moving parts, or has a kink. Before using the

range cooker, always check whether the following

requirements have been met:

– it must be possible to inspect the supply line

along its entire length (max. 1.5 m).

– the supply line must not be subject to tensile

forces or make sharp turns.

– the supply line must not touch sharp objects

or corners.

– the supply line must not touch walls heated to

more than 50°C at any point.

Caution: After connecting your Boretti, use soap

suds to check for leaks. Never do this with a

ﬂame.

Caution: A gas tube has a limited lifespan. Make

sure you replace it with a new one in a timely fa-

shion.

Boretti recommends connecting your range coo-

ker with a ﬂexible metal GIVEG tube which can be

purchased from Boretti. The maximum length of

these tubes is 1 meter and they have an unlimited

lifespan.

Caution: If your Boretti is connected to mains gas

using a ﬁxed (copper) line, you must always use a

ﬁber gasket (Figure 1).

Caution: For range cookers placed in Belgium the

optional Boretti gas line cannot be used. In Bel-

gium it is mandatory to use a BVG approved gas

line.

Figure 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti VFN 150 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti VFN 150 Manual

Product: