Manual Boretti vf-104 (page 94 of 100) (English, German, Dutch, French, Spanish)

324195

Zoom out

Zoom in

1/100

The Ceramic

Cooktop

The ceramic zones are controlled by knobs with

13 positions. In “0” position, the zone is switched

off. The ceramic zone is activated as soon as a

position between 1 – 12 is selected. If you select

a position, the zone will emanate a red glow and

emit heat to both the pan as well as the ceramic

glass.

Some zones have an extension zone. This can be

activated by turning the knob related to the zone

in question past 12. By turning the knob past 12

again, the extension zone will be switched off.

There is a residual heat indicator lamp for each

zone, which indicates that the zone is hot. The

lamp will continue to burn as long as the zone is

hot, even after it has been switched off.

Important instructions:

Do not leave the cooking zones switched on if no

pot or pan is on them. Avoid temperature chan-

ges to the glass ceramic cooktop. For example,

do not pour cold water on a hot cooktop. Make

sure the pan completely covers the cook zone,

and that it is in the middle of the zone.

Avoid contact between sugar, synthetic fabrics or

aluminum foil and the hot glass plate. These ma-

terials could cause damage to the vitroceramic

surface, or even cause it to crack: switch off the

appliance and remove these from the surface im-

mediately (warning: risk of burn injuries!)

You can clean the ceramic cooktop just like any

other glassware, with a soft and moist cloth.

There are special cleaning agents for ceramic

glass plates.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti vf-104 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti vf-104 Manual

Product: