Manual Boretti SHV 690 (page 16 of 22) (English, German, Dutch, French)

471898

Zoom out

Zoom in

1/22

Using the extractor

Operation

When the appliance is switched off, pressing any button activates the standby function and the

symbols are illuminated with a soft light so that you can see the functions and set them. Pressing

one of the buttons activates the relevant function, and the symbol lights up in blue. In order to

save energy, the operating system is provided with a device that returns the buttons to the idle

setting after all functions have been switched off and illuminates them with soft light for about 30

seconds, after which they switch off.

The extraction hood has 6 buttons:

A B C D E F

A: BORETTI LUMINA LED Lighting on/off

B: Motor on/off

C: Reduce motor speed

D: Increase motor speed

E: Delay switch

F: Replace carbon ﬁlter /clean grease ﬁlter indicator

Motor

The motor has 4 settings. The display indicates

the selected setting as follows:

Setting 1: Button C ﬂashes and lights up in

blue

Setting 2: Button C lights up in blue

Setting 3: Button D lights up in blue

Setting 4: Button D ﬂashes and lights up in

blue

Heat sensor

When the extractor is used in the automatic

mode, the motor speeds are switched auto-

matically by means of a heat sensor ﬁtted in

the hood. This mode is recommended only for

intensive use of the cooking surface (when two

or more cooking zones or burners are in use).

The automatic mode is activated by pressing

buttons C and D at the same time. The extrac-

tor operates automatically and the heat sensor

automatically adjusts the motor speed to the

temperature of the cooking surface. Button B

ﬂashes to indicate that the heat sensor is on.

To return to manual operation, press buttons C

and D simultaneously again. The correct opera-

tion of the heat sensor depends on the distance

between the hood and the cooking surface. The

greater the distance, the less sensitive the

sensor becomes.

Delay switch

Your extraction unit has a delay switch. The

delay switch is a timer that will switch off the

extractor after a number of minutes and allows

you the option of keeping the extractor running

after you have ﬁnished cooking in order to re-

move the last cooking odours from the kitchen

while you are enjoying your meal.

You can set the delay by pressing button E.

Pressing the button once will set the timer at

ﬁve minutes and button E will ﬂash once re-

peatedly; pressing it the second time will set

the timer at 10 minutes and button E will ﬂash

twice repeatedly and pressing it for the third

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti SHV 690 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti SHV 690 Manual

Product: