533769
87
Zoom out
Zoom in
Previous page
1/100
Next page
87
NL
FR
DE
EN
brackets to an upright position (Fig. 3a)
Close the door halfway. Without using force, pull
the door slowly towards you (Fig. 4). Attaching
the door is done in reverse order. However, you
must make sure that the little slots underneath
the bracket fit onto the frame of the range cooker.
This may take some practice.
Dismantling the Oven Glass Panel
In order to remove the glass panel from a Boretti
oven door, take the following steps:
Remove the oven door according to the instruc-
tions above. Unscrew the two stainless steel
screws (Fig. 5) at the top and the bottom of the
glass panel, and gently remove the glass panel
(Fig. 6). You can now clean it thoroughly. When
you reinstall the panel, make sure that the stain-
less steel strips clamp the panel properly.
Removing the Inside Panels from the
Oven
In order to remove the inside panels from the
oven, follow these steps:
• open the oven door completely
remove all racks and baking sheets from the
oven cavity
There are two large screws that you can unscrew
on the sides, after which the side panels can be
easily removed.
Cleaning the Oven Cavity(s)
Wait until the oven has cooled down completely,
then clean it with lukewarm water and a mild
cleaning agent. Never use knives, steel–wool pads
or other abrasive products or objects for cleaning
purposes. This might damage the finish on the
inside of your oven. Make sure that food spills are
removed after every cooking session, in order to
prevent damage. An additional advantage of regu-
lar cleaning is that there will be fewer unpleasant
odors the next time you use the oven.
Using the Built–In Thermometer
Some range cookers are fitted with a so–called
built–in thermometer. When the oven is cold,
insert the thermometer’s probe into the dish,
and the plug into a special connection that is on
the left side of the oven (Fig. 7). Two values will
appear on the display: The value on the left will
indicate the temperature of the thermometer,
and the value on the right will indicate the pre-
set temperature, which can be adjusted using the
+ and – button on the control panel. When the
preset temperature has been reached, the oven
will switch off and you will be warned by an audio
signal. You can switch the sound off by pressing
on any button on the operating panel.
Remove the thermometer from the connection af-
ter the oven has cooled down. Of course you can
remove the probe from the dish earlier, so that
the dish can be taken from the oven. The oven
thermometer has a reach from 0 – 99°C.
Caution: insert the thermometer into the center
of the dish, and avoid bones or fatty areas in or-
der to achieve a more accurate reading.
See Page 95 for a cooking chart.
Figure 5
Figure 6
Figure 7
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti kookplaten 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti kookplaten 2012 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info