731628

Boretti IBRIDO Manual

35
Zoom out
Zoom in
Previous page
1/63
Next page
13
4 Use of your barbecue
4.1 General information
Even though all gas connections on the
barbecue are tested for leakages before
transport, a complete test must be carried
out at the assembly site. During transport or
assembly, parts of the barbecue may have
been moved. It is also possible that the gas
pressure on the equipment is too high.
Regularly inspect the entire system for leaks
and check the system immediately in the
event that you smell gas.
4.2 Gas leak test
Always carry out a gas leak test before use of the barbecue and when the barbecue has not been
used for some time.
•Extinguish any open fires (DO NOT SMOKE when testing for leaks).
•Never carry out this gas leak test near open flames.
•Make a soapy solution made up from equal parts of water and liquid soap or gentle washing-
up liquid
•Follow the steps below:
1. Turn the control knobs of the burners to off.
2. Remove the battery from the electronic ignition.
3. Open the gas bottle.
4. Apply the soapy solution to all connections of the gas supply. If no soap bubbles are
formed, there is no gas leak. If soap bubbles start to form on a connection, this indicates
a leak. In the event that you detect a leak, turn the gas supply off immediately, tighten
the leaking connections firmly, open the gas bottle again and repeat steps 1 through to 4.
5. Turn the gas supply off.
6. Turn the control knobs of the burners on for 10 seconds to let the pressure escape from
the hose and then turn the control knobs to off again.
7. Remove the soapy solution from the connections of the equipment with cold water and
rub dry with a cloth. Check all gas supply connections before every use and do the same
when the gas bottle is being connected to the gas pressure regulator.
It is recommended that you check the gas hose for leaks every year, even if the gas
bottle has never been disconnected from the equipment.
•Note: Ensure that you test all loose connections (including the side burner) and, if required,
tighten them again when you are testing the equipment for leaks. Even a small leak in the
system can result in a dangerous situation.
•Note: These days, most gas bottles are fitted with a mechanism that detects leaks inside the
container. When the gas is being released too quickly, this mechanism cuts off the gas
supply. A leak can severely restrict the gas supply which will make it difficult to light the
barbecue.
•Note: If you are unable to close off a gas leak, then turn off the gas supply and contact your
sales outlet. Even a small leak can cause a fire.
•Note: If, after several attempts, you are unable to light the barbecue, then contact your sales
outlet.
•Note: Esure that the otrol kos are i the OFF positio he you are ot usig the
equipment.
Gasbottle 10 kg
Max 560mm
Max 304mm
Gasbottle 5-6 kg
Max 470mm
Max 300mm
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti IBRIDO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti IBRIDO in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info