Manual Boretti ESHP 20690 (page 15 of 22) (English, German, Dutch, French)

471891

Zoom out

Zoom in

1/22

Also consult the drawings on the last pages

with the alphabetic references from the expla-

natory text.

Note: Please follow the instructions

in this text carefully.

Any claim for possible damage to or ﬁre in the

appliance caused by failure to follow the in-

structions in this manual will be rejected.

Installation

The extractor must be installed at least 65 cm

above the cooking surface. If the installation

instructions of the cooking appliance specify a

greater distance, this must be taken into ac-

count. Fit the extractor in such a way that it

will be easy to remove from the wall without

causing any damage. Removal may be neces-

sary for future service operations.

The extractor must be connected to an extrac-

tion duct with a minimum diameter of 150 mm.

This is very important to ensure the life and ex-

traction capacity of your extractor.

Extraction

The extraction duct must be connected directly

to the motor housing. When ﬁtting the extrac-

tion duct, make sure that the one-way valve is

not blocked! We recommend ﬁtting the duct

with tape and not with screws.

It is advisable to keep the duct as short as pos-

sible, with as few bends as possible. It is also

advisable to use a smooth duct in order to keep

resistance to the minimum. This is extremely

important for the best operation of your ex-

tractor.

Note: No ducting is supplied with the extrac-

tor.

If it is not possible to vent the steam outside,

the extractor can be used in the ﬁlter mode

F (recirculation) by ﬁtting carbon ﬁlters. The

ﬁltered air is returned to the kitchen through

the openings on the side of the chimney.

Electrical connection

The mains voltage must correspond to the

voltage stated on the factory plate inside the

hood.

Should do you want to dispose of the appliance

for whatever reason, please observe the fol-

lowing:

Take the appliance to the local authorised col-

lection point for scrapped household applian-

ces. Correct processing can ensure that valua-

ble materials are recycled intelligently. Before

you dispose of the appliance, it is important to

cut off the electrical supply cable and remove

it with the plug.

This appliance bears the mark in terms of the

European Directive 2002/96 EG on waste

electrical and electronic equipment. This direc-

tive lays down the standards for the collection

and recycling of waste equipment which are ap-

plicable to the entire territory of the European

Union.

Environmental

instructions

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti ESHP 20690 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti ESHP 20690 Manual

Product: