533783
12
Zoom out
Zoom in
Previous page
1/22
Next page
Gas Requirements
L.P. GAS INSTALLATION
Never attach an unregulated gas line to the appliance. Connection to an
unregulated gas line can cause excessive heat or fire.
Verify the type of gas supply to be used, either Natural Gas (N.G.) or Liquid Propane (L.P.), and make sure the serial plate
agrees with that of the supply.
Always have a qualified service technician perform difficult conversions
or modifications.
This grill and its individual shut off valve must be disconnected from the gas supply piping system during any pressure testing of
that system at test pressures in excess of 1/2 PSIG (3.5 kPa.).
This grill must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure
testing of the gas supply piping system at test pressures equal to or less than 1/2 PSIG (3.5 kPa.).
Boretti Gas Grills that are set to operate with L.P. gas come with a high capacity hose and regulator assembly. (NOTE:
Only use
the pressure regulator and hose assemblies specified by Boretti). L.P. Cylinders can be purchased separately at an
ndependent dealer
.
L.P.TANK INFORMATION
Never use a dented or rusted L.P. tank or cylinder with a damaged valve.
L.P. cylinders are equipped with an O.P.D. (Overfilling Prevention Device). The device shuts off the flow of gas to a cylinder after
80% capacity is reached. This limits the potential for release of gas when the cylinder is heated, averting a fire or possible injury.
L.P
.TANK USE
When turning the L.P. tank on, make sure to open the valve SLOWLY two (2) complete turns to ensure proper gas flow.
Most gas tanks now come equipped with a leak detector mechanism internal to the tank, when gas is allowed to
escape rapidly it shuts off the gas supply. Opening the valve rapidly may simulate a gas leak, causing the safety
device to activate, restricting gas flow causing low flames. Opening the valve slowly will ensure this safety feature is
not falsely triggered.
When not in use, gas supply cylinder valve is to be in the "OFF" position.
The tank supply system must be stored upright to allow for vapor withdrawal.
The regulator and hose assembly must be inspected before each use of the grill. If there is excessive abrasion
or wear or if the hose is cut, it must be replaced prior to the grill being used again.
Cylinders must be stored outdoors out of the reach of children
and must not be stored in a building, garage or any
other enclosed area.
Only a qualified gas supplier should refill the L.P. tank.
Place dust cap on cylinder valve outlet whenever the
cylinder is not in use. Only install the type of dust cap
on the cylinder valve outlet that is provided with the
cylinder valve. Other types of caps or plus may result
in leakage of propane.
Do not store a spare L.P. gas cylinder under or near the
grill. Never fill the cylinder beyond 80% full.
If this information is not follo
wed exactly, a fire
causing death or serious injury may occur.
12
WARNING
WARNING
WARNING
Upright Tank
Orientation
Tank
Connection
Regulator Inlet
Connector
LP hose / regulator
supplied
(Type 1 Connector)
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti Da Vinci Top at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti Da Vinci Top in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Boretti Da Vinci Top

Boretti Da Vinci Top User Manual - German - 24 pages

Boretti Da Vinci Top User Manual - Dutch - 22 pages

Boretti Da Vinci Top User Manual - Dutch - 24 pages

Boretti Da Vinci Top User Manual - French - 24 pages

Boretti Da Vinci Top User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info