798851

Boretti CRI915 Carrara Manual

36
Zoom out
Zoom in
Previous page
1/272
Next page
36
6. Using the induction hob
The hob is equipped with one radiant generator per cooking zone. Each
generator located below the glass ceramic cooking surface generates an
electromagnetic field that induces a thermal current in the base of the pan.
Ininduction cooking, heat is not transmitted from a heat source, but created
byinductive currents directly inside the pan.
i Advantages of induction cooking:
* Energy saving thanks to the direct transmission of energy to the pan,
compared with traditional electric or gas cooking.
* Safer thanks to the transmission of energy solely to the pan rested
on the hob.
* Highly efficient energy transmission from the induction cooking zone
to the base of the pan.
* Rapid heating speed.
* Reduced risk of burns, since the cooking surface is heated solely at
the base of the pan.
* Spilt food does not stick to the surface of the hob.
6.1 General warnings
1. Remove all labels and self-adhesives from the ceramic glass.
2. Before connecting the appliance to the mains, ensure it has been standing
at oom temperature for at least 2 hours.
3. People with a pacemaker or other similar devices must ensure that the
operation of their devices is not jeopardised by the induction field, the
frequency range of which is between 20 and 50 kHz.
4. Do not wear metal objects or necklaces in direct contact with the body.
When entering the radiating field of the induction hob, they may overheat
with an ensuing risk of scalding. Non-magnetisable metals (e.g. gold or
silver) do not carry this risk.
5. Objects with a magnetic strip (credit cards, swipe cards, floppy discs, etc.)
must not be left near the appliance while it is on.
6. Do not heat canned food or other sealed containers. The pressure that
builds up inside the container during cooking may cause it to explode.
7. Do not place metal objects such as cookware or cutlery on the surface
of the hob as they can overheat, with an ensuing risk of scalding.
ENBoretti Manual CRG916 / CRI915 / User guide - Installation advice
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti CRI915 Carrara at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti CRI915 Carrara in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info