Manual Boretti CRG916 Carrara (page 14 of 272) (English, German, Dutch, French)

798850

Zoom out

Zoom in

1/272

3.3 Electric Connection

Make sure that the voltage and capacity of the power line conform to the data

shown on the plate located on the back of the appliance; a copy is attached to

the manual. A second plate, including detailed information about the model and

serial number, is placed inside the equipment on the left side and is visible on

opening the oven door. These plates must never be removed.

Prepare an omni-polar cut-off device on the power supply line of the appliance

with a contact opening distance equal to or more than 3 mm, located in a

convenient position near the appliance.

Note:

Do not use reducers, adapters or shunts.

Before making the electric connection, make sure of the efficiency of the

earthing. Make sure that the relief valve and the home wiring system are able to

withstand the appliance load. The yellow/green earth cable must not be subject

to cut-offs. The electric cable must not come into contact with parts whose

temperature is more than 50°C higher than room temperature.

ENBoretti Manual CRG916 / CRI915 / User guide - Installation advice

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti CRG916 Carrara in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6.34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti CRG916 Carrara Manual

Product: