Manual Boretti CFBI 601 Toscana (page 223 of 232) (English, German, Dutch, French)

798858

223

Zoom out

Zoom in

1/232

223

Replacing the oven lamp

Warning

Ensure the appliance is switched off and disconnected from the

electrical power supply before replacing the lamp to avoid the

possibility of electric shock.

*Let the oven cavity and the

heating elements to cool down.

*Switch off the electrical

supply.

*Remove the protective cover

“A” (fig. 6.4).

*Replace the halogen lamp

“C” with a new one suitable

for high temperatures

(300°C) having the following

specifications: 220-240 V,

50/60Hz and same power

(check watt power as stamped

in the lamp itself) of the

replaced lamp.

Important Warning

Never replace the bulb with bare hands; contamination from your

fingers can cause premature failure. Always use a clean cloth or gloves.

*Refit the protective cover.

Note

Oven lamp replacement is not covered by your guarantee.

Fig. 6.4

WRONG

CORRECT

ENUser guide - Installation advice

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti CFBI 601 Toscana in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8.11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti CFBI 601 Toscana Manual

Product: