Manual Boretti BV-89 (page 44 of 46) (English, German, Dutch, French)

533990

Zoom out

Zoom in

1/46

• This appliance is provided with a special drain system.

1. Pull out the bottom drawer A of the freezer compartment and put it on the floor

aligning it to the cabinet front.

2. Pull out the drain pipe B placed on the back wall of the freezer compartment. Then

place it in the groove on the front side of the floor of the appliance.

3. If there Is still water on the freezer floor, you can clear it away by using a sponge.

• Clean the interior by hand with lukewarm water and a little detergent. Never use abrasive

products or aggressive cleaning agents.

• Dry the inside of the unit, plug on the mains, and set the thermostat knob to position “5”.

After 24 hours, reset the thermostat to the desired position.

PART 5. BEFORE CALLING YOUR AFTER SALES SERVICE

If your refrigerator is not working properly, it may be a minor problem, therefore check the

following.

The appliance does not operate, Check if;

• There is a power failure,

• The mains plug is not properly plugged in, or is loose

• The thermostat setting is on position “0”,

• The socket is defective. To check this, plug in another appliance that you know which is

working into the same socket.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BV-89 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti BV-89 Manual

Product: