533754
73
Zoom out
Zoom in
Previous page
1/92
Next page
NL
FR
D
EN
73
Electrical Connection
The appliance must be connected to the elec-
trical mains by qualifi ed personnel and in con-
formity with statutory legislation.
The voltage of the electric supply must corres-
pond to the value indicated on the label af xed
to the underside of the appliance.
Make sure that the electric system has an ef-
cient earth connection in compliance with re-
gulations and legislation. This appliance must
be earthed.
IMPORTANT: if the household electrical system
does not meet specifi cations or does not have
an ef cient earth connection, the appliance will
not operate.
If the appliance is not tted with a plug, con-
nect a standard plug to the power cable.
If the appliance is to be wired directly to the
mains supply, a disconnect device must be in-
terposed having a suf cient contact gap to al-
low complete isolation also in category III surge
conditions, in accordance with installation re-
gulations.
In case of a power failure, the appliance will
not operate and the burners cannot be lit using
matches or external igniters.
However, the appliance can continue to operate
correctly if the power cord is connected to an
uninterruptible power supply. In this case, ope-
ration is normal.
Gas conversion and adjustments
If the appliance is prearranged for a type of gas
different from the available type, the burner
nozzles must be changed and the control card
must be set up with the parameters relative to
the new confi guration.
Changing the nozzles
Choose the required nozzles with reference to
the following “Technical Specifi cations” table.
Proceed as follows:
Remove the pan stands and burners from the
hob.
Unscrew nozzles U (fi g.6) and U1/U2 (fi g.7)
using a socket spanner (L), and replace with
the correct nozzle for the available gas type.
Secure the nozzle without over-tightening.
g. 6
g. 7
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti BTG80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BTG80 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Boretti BTG80

Boretti BTG80 User Manual - English, German, Dutch, French - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info