533723

Boretti BPOP60 Manual

31
Zoom out
Zoom in
Previous page
1/47
Next page
60 61
EN
NL
FR
DE
The door remains locked until the oven temperature drops below the safety
threshold, at this time the control unlocks the door.
The cooling fan starts as soon as the function is selected and turns to its higher
speed when the inner parts get hot. The oven temperature is automatically set to
475°C in order to perfectly clean the cavity.
min
c
Fig 9d
The control also locks immediately the door in order to guarantee the user safety,
given that the temperature inside gets very hot. A lock icon on the temperature
display shows the status of the latch mechanism at any time:
Door unlocked, lock symbol off.
Door locked, lock symbol always on.
Latch moving, transition in progress, lock symbol flashing.
Eco-Pyrolyse
When this function is active, the writing “Eco” flashes every 5 seconds on the
temperature display. The standard time is 1h:30min and can never be changed,
the clock display shows P1:30. It is used in case a light cleaning action is requested.
Door and commands lock for children safety (pyro)
This is an additional safety functions. The door latch mechanism, managed
automatically during pyrolyse can be actuated manually by the user in order to lock
the oven door and prevent children from having free access to the oven.
Hold
and keys simultaneously for about 3 seconds to lock/unlock the door
manually. Also the keyboard is disabled while this function is actuated: the display
shows a key on the clock display in case of any attempt to touch inactive keys.
Buzzer volume
The buzzer volume can be set, when the control is in stand-by mode, touching first
the [B] key until the writing “L1”, ”L2” or ”L3” is displayed (depending on the set
volume) then touching the [D]/[E] key. At any touch the buzzer sounds a double
beep, selecting the volume out of three available levels.
depends on the oven model. The temperature range is between 75°C and 250°C
for most functions. Preset temperatures are mainly 190°C for convection modes,
210°C for thermal modes and 230°C for grill functions.
Exceptions are Eco-Bake (preset=190°C), Pyrolyse (fixed 475°C), and warming
mode which range is between 50°C and 120°C.
Booster (Fast Preheat)
This function allows to fasten the oven preheating, saving time. When the oven
temperature reaches the set-point a continuous acoustic warning signal, about 5
seconds long, recall the attention of the user. Fast Preheat is not available in Grill,
Pyrolyse, Eco-Bake, Keep Warm and Defrost. Touch [A] key to enable the function,
the writing “Prh” appears on the clock display, the “°C” symbol on the temperature
display flashes until the oven reaches the set temperature.
Eco-Bake
This function is defined in order to obtain a consistent energy saving. The cooling
fan is initially off and turns on only when the inner parts temperature gets high,
then it works with the heating elements. Cooking might be a little bit slower than
the standard Bake, especially when the oven is heavily loaded. When this function
is active, the writing “Eco” flashes every 5 seconds on the temperature display.
Defrost
This function is used to defrost frozen food in a short time. It doesn’t heat up
the oven, only the convection fan works. The temperature display shows dEF to
indicate that this special mode is active.
Pyrolyse (Self-Clean)
Select the proper program to start a cleaning cycle. The temperature display show
the writing -P- and the icon display shows the elements in use. The clock display
starts showing “Pyro” for a few seconds.
The clean time can be set according to the same rules of the automatic functions,
and therefore the pyrolitic cycle can be delayed.
The maximum allowed clean time is 3 hours, the minimum 1 hour. The standard
time is 1h:30min, the clock display shows P1:30. At the end of the self-cleaning
activity the display shows “---“ steady and
flashing as long as the oven is cooling
and the door remains locked. Once the oven is cool enough, the door unlocks and
the display shows “End”.
Touch [H] key in any moment to stop the oven.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti BPOP60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BPOP60 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 20,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info