534012

Boretti BPK-45 Manual

11
Zoom out
Zoom in
Previous page
1/38
Next page
20 21
ENGB
it emits could aect their operation.
Components for the installation of the machine
The machine must be installed in compartments that are
460 mm high and between 560 and 568 mm wide. The
following installation components are supplied with the
machine.
1. Fixed support of the machine.
2. N°13 self-threading screws 3.9X19
3. N°1 xed power cord
4. N°2 lateral guides
5. N°2 lateral 1-mm plates
6. N°2 lateral 2-mm plates
Installation of the machine
Position the xed part provided
by resting it on the surface of
the furniture
Insert the side plates needed to compensate for any
empty spaces. The width of the compartment that
houses the machine is determined by the thickness of
the sides of the furniture. Four plates are supplied to
compensate for the dierent measures obtainable, two
that are 2 mm thick and two that are 1 mm thick. They
are used to compensate for the internal width of the
compartment to obtain an measurement of 562-560 mm.
Then mount the 2 guides
using the remaining 8
self-threading screws.
Insert the machine
by matching up
the guides with the
supports already
mounted in the
compartment.
Slide it all the way in until the
safety stops click.
Electrical connection
Fasten the power to the left
side of the compartment
using one of the self-
threading wood screws
provided and the xed cord
as indicated in the gure.
Loosen the xed cord
mounted on the machine.
Tighten the power cord on the
machine, as shown in the gure.
Connect the power
cord as shown in the
gure.
4. DESCRIPTION OF THE
COFFEEMAKER
1. Water tank
2. Decalcifying lter
3. Dispenser
4. Water/steam dispensing nozzle
5. Drip basin
6. Coee container
7. Grind regulation knob
8. Control panel
9. Door/tray for emptying the coee grounds
5. TECHNICAL CHARACTERISTICS
Width 594 mm
Depth 475 mm
Height 445 mm
Tank capacity 2.5 l
Net weight 26 kg
Gross weight 31 kg
Power supply voltage 230 V
Rated power 2000 W
Power absorbed by the heating
elements
1700 W
Power absorbed by the pump 50 W
Operating pressure 12 bar
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti BPK-45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BPK-45 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info