533718

Boretti BPC45 Manual

54
Zoom out
Zoom in
Previous page
1/139
Next page
54
GB
ATTENTION: certain recipes use pre-heating, so put the dish in when the
combimagnetron has reached the set temperature and the display shows “PRE-
HEATING FINISHED PUT IN THE DISH”
When cooking is nished the display will ash “PROGRAM FINISHED REMOVE THE
DISH” and, at the same time, the combimagnetron will beep until you press a key or
open the door.
Note: at any moment, if you make a mistake choosing the values and/or you want to change the settings of your
recipe, you can select which cancels it and allows you start over from the beginning of the procedure.
NOTE: If you are cooking with the modied parameters of a pre-set recipe, while the combimagnetron beeps at
the end of cooking, you will see:
see how to save recipes in the next paragraph.
PERSONALISING RECIPES
Once a pre-set recipe has nished, if you decide that the parameters must be changed for the results that you
want, you can change the recipe you used and save it for the next time by storing the new parameters used
(weight and cooking time).
To change the parameters of a preset recipe, do the following:
- with the + key select “YES”
- conrm with the key, the time used is displayed
- change with the + and - keys and conrm with , the weight used appears
- change with the + and - keys and conrm with , you will see the message “Recipe
saved POS. 1/1, and so on with a progressive number
Every time you access the “personal recipes” menu, you will ne your recipes saved in
the list of your recipes.
If there is not enough memory for saving personal recipes, the following message
appears on the display: “Insucient memory, impossible to save”.
Before saving your recipe, you must delete one
from the menu in this way:
- select the function;
- and then, by pressing go to the “personal
recipes” section where you will nd the saved
recipes;
- use the buttons to scroll through the menu and select the recipe you want to
delete.
NOTE: the names are given by default by the menu);
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti BPC45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BPC45 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info