Manual Boretti BIK79 (page 67 of 68) (English, German, Dutch, French)

533761

Zoom out

Zoom in

1/68

ELECTRICAL CONNECTION

 The installation of this appliance and the connection to the electrical network should be

entrusted only to an electrician perfectly to the fact of the normative regulations and which

respects them scrupulously.

 Protection against the parts under tension must be ensured after the building-in.

 The data of connection necessary are on the stickers place on the hob casing near the

connection box.

 The connection to the main must be made using an earthed plug or via an omnipolar circuit

breaking device with a contact opening of at least 3 mm.

 The electrical circuit must be separated from the network by adapted devices, for example:

circuit breakers, fuses or contactors.

 If the appliance is not fitted with an accessible plug, disconnecting means must be

incorporated in the fixed installation, in accordance with the installation regulations.

 The inlet hose must be positioned so that it does not touch any of the hot parts of the hob or

even.

Caution!

This appliance has only to be connected to a network 230 V~ 50/60 Hz.

Connect always the earth wire.

Respect the connection diagram.

The connection box is located underneath at the back of the hob casing. To open the cover use a

medium screwdriver. Place it in the slits and open the cover.

* calculated with the simultaneous factor following the standard EN 60 335-2-6/1990

Connection of the hob

Setting up the configurations:

For the various kinds of connection, use the brass bridges which are in the box next the terminal

Monophase 230V~1P+N

Put a bridge between terminal 1 and 2.

Attach the earth to the terminate “earth”, the neutral N to terminal 4, the Phase L to one of the

terminals 1 or 2.

Biphase 400V~2P+N

Attach the earth to the terminate “earth”, the neutral N to terminal 4, the Phase L1 to the terminals 1

and the Phase L2 to the terminal 2.

Caution! Frequent loosening and screwing of the screws on the connection box risks

damaging the efficiency of the tightness once screwed. It is therefore advisable

to keep screwing and unscrewing to a minimum.

Ensure that the cables are correctly inserted and tightly screwed down.

Mains Connection Cable diameter Cable

Protection

calibre

230V~ 50/60Hz 1 Phase + N 3 x 2,5 mm²

H 05 VV - F

H 05 RR - F

25 A *

400V~ 50/60Hz 2 Phases + N

4 x 1.5 mm²

H 05 VV - F

H 05 RR - F

16 A *

We cannot be held responsible for any incident resulting from incorrect connection or

which could arise from the use of an appliance which has not been earthed or has been

equipped with a faulty earth connection.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BIK79 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti BIK79 Manual

Product: