714529
8
Zoom out
Zoom in
Previous page
1/20
Next page
EN
8
Installation notes
www.bora.com
3 Installation notes
Observe the safety and warning information in these
operating and installation instructions, as well those of
the BORA cooktop extractor (see section Safety).
3.1 Checking the scope of delivery
Name Quantity
ULS plinth fan 1
Installation notes 1
Sealing tape – plinth fan 1
Tab. 3.1 Scope of delivery
Check the scope of delivery for damage and make sure
it is complete.
If there are any missing or damaged parts, please
notify BORA After Sales Service.
Do not under any circumstances install parts which are
damaged.
Dispose of transport packaging in the proper manner
3.2 Installing the plinth fan
INFO The floor unit must not be supported on the plinth
fan housing.
Prepare the plinth fan by attaching the sealing tape
depending on the installation situation.
Secure the sealing tape to the inlet nozzle.
Fig. 3.1 Sealing tape position for installation with a round duct
3.2.1 Freestanding installation
Clean any major dirt from the supporting surface.
Position the plinth fan in the intended installation position.
Ensure that the plinth fan is securely positioned on all
4 feet.
Make sure that the connection cables are accessible.
3.2.2 Removing the inlet nozzle for
installation purposes
You can remove the plinth fan’s inlet nozzle from the fan
housing for installation purposes.
Fig. 3.2 Removing the inlet nozzle
Unlock the inlet nozzle by turning it to the left.
Lift the inlet nozzle up off the fan housing.
Position the plinth fan in the installation position.
Place the inlet nozzle on the fan housing.
Lock the inlet nozzle by turning it to the right.
The end positions when unlocking and locking the inlet
nozzle are specified by an end stop.
3.2.3 Suspended installation
If the plinth fan is installed suspended, the fixing
material must be made available at the installation
site in accordance with the building material.
Hand-tighten the fixing nut and secure it against
coming loose.
Secure the plinth fan to the three mounting straps
prepared on the housing.
The connection cables must be secured with the cable
routing clip provided.
3.3 Connecting the plinth fan to the
universal control unit
1
2
Fig. 3.3 Connection plug of the plinth fan
[1] Plinth fan connection plug control line
[2] Plinth fan connection plug power supply cable
Connect the fan’s control line [1] to the universal
control unit.
Connect the fan’s power supply cable [2] to the
universal control unit.
Check the plug connections to ensure that they are
secure.
Make sure that the cable is not damaged.
Verify that the installation was done correctly.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora ULS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora ULS in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info