714531
10
Zoom out
Zoom in
Previous page
1/16
Next page
EN
10
Installation
www.bora.com
4 Installation
Observe all safety and warning information (see the
Safety section).
Follow the enclosed manufacturer’s information.
INFO The product must not be installed above
cooling devices, dishwashers, stoves, ovens,
washing machines or driers.
4.1 Checking the scope of delivery
Name Quantity
Activated charcoal filter cartridges 3
Operating and installation instructions 1
Fixing screw set 1
Angle bracket 2
Mounting bracket 2
Housing plinth 1
Fine filter 1
Tab. 4.1 Scope of delivery
Check the scope of delivery for damage and make sure
it is complete.
If there are any missing or damaged parts, please
notify BORA After Sales Service.
Do not under any circumstances install parts which are
damaged.
Dispose of transport packaging in the proper manner
(see the Decommissioning and Disposal section).
4.2 Tool and aids
The following tool is required to correctly install the
recirculation unit:
Phillips screwdriver
4.3 Assembly instructions
Keep the airflow channels as short as possible.
Do not install the device in floor units or bodies with no
separation from the doors or drawers. as the positive
pressure could cause these to open of their own
accord.
The drawers, back panels and shelves in the floor unit
must be removable for maintenance and cleaning
purposes.
If the device is installed in an adjacent room, air
recirculation must occur in the room in which the
vapour extraction system is installed so as not to
generate any low pressure. Use the UUERH0 air
recirculation hood available as an accessory for this
purpose.
4.4 Installing the device
INFO A return flow aperture of > 500 cm² in the
plinth area must be provided for recirculation.
INFO The air duct diameter must be no less than
150 mm (176 cm²).
INFO With an air duct length of 50 cm, no corner or
bend should be installed before the fan module
(motor).
INFO Install straight duct pieces with a length of at
least 50 cm between the corners or bends.
4.4.1 Installation
Fig. 4.1 Installed air purication box
Depending on the installation situation, screw the
knurled screw to the left or right of the opening on the
housing plinth to allow unobstructed access to the fine
filter.
Depending on the attachment method, attach the
angle or mounting brackets to the housing plinth.
Connect the duct with the housing plinth’s ducting.
Use the screws provided to attach the housing plinth.
Insert each activated charcoal filter cartridge into the
intended opening and then twist it clockwise.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora ULB3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora ULB3 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora ULB3

Bora ULB3 User Manual - German - 16 pages

Bora ULB3 User Manual - Dutch - 16 pages

Bora ULB3 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info