714537
6
Zoom out
Zoom in
Previous page
1/8
Next page
EN
6
Installation
www.bora.com
4 Installation
Observe the safety and warning information in these
operating and installation instructions, as well those of
the BORA cooktop extractor (see section Safety).
4.1 Check scope of delivery
Name Number
ULA external wall fan 1
Assembly information 1
Telescopic installation duct with integrated
backflow trap
Air repellent rail 1
Empty duct Ø 40 mm x 400 mm for cable passage 1
EPDM sealing tape 1
Tab. 4.1 Scope of delivery
Check the scope of delivery for completeness and
damage
Notify BORA customer services if parts of the delivery
are missing or damaged.
Do not assemble damaged parts under any
circumstances.
Remove the transport packaging properly.
4.2 Installing the external wall fan
INFO The external wall fan is suitable for installation
on the outside of the building with a wall
thickness of 280 mm to 490 mm.
INFO The pre-installation of a KG duct Ø 200 mm
(not contained in the scope of delivery)
facilitates installation in the external wall.
Observe all of the measures provided at the installation
site to install the fan correctly and without any errors
in consultation with all the trades concerned.
Make sure that the wall is properly sealed.
If necessary, install a steam trap (not contained in the
scope of delivery).
4.2.1 Installation
Clean the floor of heavy soiling.
Lay the empty duct supplied in the masonry opening
(in the pre-installed KG duct)
Unscrew the casing [2].
Install the air repellent rail [4] on the fan.
Lay both connection cables [7], [8] through the empty
duct.
Put the telescopic installation duct [5] on the external
wall fan 1].
Mount the external wall fan [1] correctly on the
external wall.
The external wall fan [1] must be mounted according to
the structure of the building.
Screw on the casing [2].
Connect the telescopic installation duct [5] to the duct
system.
Ensure the duct system is not taut.
Lay both connection cables [7], [8].
4.2.2 Connection to the BORA Ecotube duct
system
1
2
3
4
5
Fig. 4.1 Connection to BORA Ecotube duct system
[1] Telescopic installation duct with integrated backflow trap
[2] EPDM sealing tape
[3] ERV duct connection (not contained in the scope of
delivery)
[4] ERD seal (not contained in the scope of delivery)
[5] ER round duct (not contained in the scope of delivery)
Join the fan to the Ecotube duct system as shown.
4.2.3 Connection to the control unit
1
2
Fig. 4.2 Connection plug for the external wall fan
[1] Connection plug for the control line
[2] Connection plug for the power supply cable
Connect the control line [1] of the fan to the control
unit of the cooktop extractor.
Connect the power supply cable [2] of the fan to the
control unit of the cooktop extractor.
Check that the plugs and sockets fit snugly.
Make sure the cable is not damaged.
Check that the installation correct.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora ULA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora ULA in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora ULA

Bora ULA User Manual - German - 8 pages

Bora ULA User Manual - Dutch - 8 pages

Bora ULA User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info