714407
33
Zoom out
Zoom in
Previous page
1/60
Next page
EN
33
Installation
www.bora.com
Fitting the installation clamps
click
click
1
2
Fig. 6.31 Inserting the cooktop
[1] Retaining brackets
[2] Installation clamps
INFO 2 installation claps must be fitted to each side of
the cooktop.
Slide the 4 installation clamps [2] until they reach
the stop position in the retaining brackets [1] on the
bottom of the cooktop.
Extending the telescopic pull-out (optional)
INFO The telescopic pull-out is used to connect the
duct to the back wall of the kitchen unit. It
enables the distance between the cooktop and
the back wall of the unit to be flexibly bridged
(max. 80 mm). If necessary, the telescopic pull-
out can be extended by a further 105 mm with the
PULBTA extension (available as an accessory).
(68,5)
(222,5)
137
PUXU/PURU
Schablone für Rückwandausschnitt
Template for cut-out on rear wall
R12,5
PURUBP-001
132
125
445
132
10
20
30
40
0
10
20
30
40
0
10
20
30
40
0
10
20
30
40
0
Fig. 6.28 Template for back wall cut-out
Position the template on the back wall of the unit with
the help of the markings and instructions.
INFO Centre of cut-out (horizontal):
125 mm from the top edge of the cooktop
Centre of cut-out (vertical):
Offset 132 mm from the centre of the cooktop.
Draw the bore hole accordingly with the aid of the
drilling template provided.
Saw out the return flow aperture.
Decrease the height of the skirting boards or create
corresponding openings in the plinth.
6.7.2 Preparing the cooktop
Attaching the sealing tape
2
1
Fig. 6.29 Sealing tape for surface mounting
1
2
Fig. 6.30 Sealing tape, ush installation
[1] Black, heat-resistant silicone sealant
[2] Sealing tape
With surface mounting, attach the enclosed sealing
tape [2] to the underside of the cooktop before
installing it. Do not leave any gaps.
With flush installation, attach the enclosed sealing tape
[2] to the horizontal cutting edge in the worktop cut-
out, even if you are sealing the cooktop with a silicone
sealing compound [1] or similar.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Puxu at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Puxu in the language / languages: French as an attachment in your email.

The manual is 12,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Puxu

Bora Puxu User Manual - English - 60 pages

Bora Puxu User Manual - German - 60 pages

Bora Puxu User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info