714406
44
Zoom out
Zoom in
Previous page
1/60
Next page
EN
44
Operation
www.bora.com
Setting the time
Select the desired power level:
Command Increase time Decrease time
Swipe
upwards
downwards
Tap
(exact to the minute) (exact to the minute)
Tab. 7.3 Setting the time
The timer symbol starts to flash.
Starting the timer
Tap the flashing timer button
The set time starts to count down.
The timer symbol is shown next to the cooking
zone.
The operating panel display changes to the standard
display after 2 seconds.
10 seconds before the set time lapses, the system
flashes the remaining time.
In the last 5 seconds of the countdown an acoustic
signal can be heard every second.
Showing the remaining time
The cooking zone timer is active and the time counts
down:
Tap the cooking zone
The remaining time is shown in the multi-function
display.
Changing active timers
Tap a cooking zone with an active timer
The remaining time is displayed.
Tap the timer button
The timer is stopped.
The remaining time flashes in the display.
The system changes to timer editing mode.
Change the set time (see “Setting the time”).
Confirm the new set time and start the timer (see
“Starting the timer”).
Multi-timer
Tap on a different cooking zone
The additional cooking zone functions are displayed.
If the chosen cooking zone is not yet active (= power
level
0
) a power level can now be set.
Tap the timer button
The time flashes in the 7-segment display above the
sliders in minutes (
0
0
0
).
Now the time can be set and the timer started
(see “Setting the time” and “Starting the timer”
respectively).
Switching the timer off early
Tap a cooking zone with an active timer
The remaining time is displayed.
Long press on the timer button
or
Activating the bridging function
Tap both cooking zones at the same time.
The bridging function is now active.
The light that looks like a hyphen goes out and the
additional functions are displayed.
Zone functions apply to the linked cooking zones
(double display).
Both cooking zone indicators show the same power
level.
Active additional cooking zone functions are adopted.
Changes to the power level now apply simultaneously
to both cooking zones.
Setting power levels when the bridging function is
active.
Tap a cooking zone with an active bridging function.
Set the power level (see Adjusting the power level)
Deactivating the bridging function
Long press on one of the two cooking zones with an
active bridging function
or
tap the cooking zones with an active bridging function
simultaneously.
The bridging function is deactivated.
The hyphen symbol lights up
The power levels are set to 0
If a timer was active, it is deactivated.
If cookware is only detected on one of the two cooking
zones, the bridging function is cancelled after ten
seconds and the corresponding cooking zone is
deactivated.
7.5.8 Automatic bridging function
INFO If the permanent pan size recognition is switched
on (see Customer menu), the automatic bridging
function is also activated.
7.5.9 Cooking zone timer
INFO To be able to activate the timer function, a
cooking zone power level must first be set.
INFO The timer function can be used for each cooking
zone. Several timers can be activated at the same
time (multi-timer).
Activating cooking zone timers
Tap on a cooking zone
The additional cooking zone functions are displayed.
If the chosen cooking zone is not yet active (= power
level
0
) a power level can now be set.
Tap the timer button
The time flashes in the multi-function display above the
sliders in minutes (
0
0
0
).
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Puxa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Puxa in the language / languages: French as an attachment in your email.

The manual is 12,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Puxa

Bora Puxa User Manual - English - 60 pages

Bora Puxa User Manual - German - 60 pages

Bora Puxa User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info