714403
52
Zoom out
Zoom in
Previous page
1/60
Next page
EN
52
Cleaning and Maintenance
www.bora.com
Inside the inlet opening pull the filter replacement
cover out of the filter housing opening (To remove the
filter replacement cover see Fig. 8.5).
1
2
5 4 3
Fig. 8.4 Air guiding housing
[1] Air guiding housing
[2] Housing base
[3] Spigot
[4] Sealing groove
[5] Lock
Hold the housing base [2] with one hand.
Release the 6 locks [5] around the edge of the base.
Remove the housing base [2].
Clean the air guiding housing [1] and the housing base
[2] with a mild cleaning agent.
8.5.2 Closing the air guiding housing
Position the housing base [2] under the air guiding
housing [1] with the help of the 3 spigots[1].
Push the housing base [2] upwards into the sealing
groove [4].
Close the 6 locks [5].
Check that the housing base is positioned correctly.
Inside the inlet opening push the filter replacement
cover until it comes to a stop in the filter housing
opening (To insert the filter replacement cover see Fig.
8.11).
Check that the filter replacement cover is positioned
correctly.
Insert the stainless steel grease filter and the air inlet
nozzle.
Cleaning in the dishwasher
Remove coarse food residues from the stainless steel
filter
Rinse the air inlet nozzle and stainless steel grease
filter with a rinsing program at maximum 65 °C.
8.4.3 Fitting the components
Inserting the stainless steel grease filter
Take hold of the stainless steel grease filter by the
handle [2].
Insert the stainless steel grease filter [1] in the inlet
opening [3]. A lock is not provided or necessary.
Inserting the air inlet nozzle
Insert the air inlet nozzle in the inlet opening.
Make sure it is positioned correctly.
8.4.4 Removing liquids from the device
Any liquids that flow into the device through the inlet
opening are caught by the stainless steel grease filter
(up to 150 ml) and in the air guiding housing. Do the
following:
Switch off the fan and deactivate the after-run function
(see Operation chapter).
Remove the air inlet nozzle and stainless steel grease
filter (see Cleaning and Maintenance chapter).
Empty the stainless steel grease filter.
Check whether any liquid has gathered in the base of
the air guiding housing.
If necessary, wipe the liquid up from the housing base
from above through the inlet opening using a sponge
or cloth.
Clean the air guiding housing (see Cleaning and
Maintenance chapter, air guiding housing).
To dry the odour filter and duct parts respectively,
switch on the cooktop extractor at a minimum power
level of 5.
After 120 minutes the cooktop extractor will
automatically switch to the automatic after-run
function (see Device Description chapter).
8.5 Cleaning the air guiding housing
Grease particles and limescale residues from cooking
vapours can settle on the surface of the air guiding
housing. For this reason, regular cleaning is essential.
The air guiding housing can be found on the bottom of the
cooktop inside the floor unit.
8.5.1 Opening the air guiding housing.
Make sure that the cooktop and cooktop extractor are
switched off (see the Operation chapter).
Wait until the fan level indicator shows
0
.
Remove the air inlet nozzle and stainless steel grease
filter.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pure at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pure in the language / languages: French as an attachment in your email.

The manual is 12,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pure

Bora Pure User Manual - English - 60 pages

Bora Pure User Manual - German - 60 pages

Bora Pure Usermanual and installation guide - Dutch - 82 pages

Bora Pure User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info