714404
17
Zoom out
Zoom in
Previous page
1/60
Next page
EN
17
Device description
www.bora.com
The system basically differentiates between two different types
of acoustic signals:
Acoustic signal Purpose
Short individual beep (0.1 s) Confirmation of a selection
Sequence of beeps Interaction required
Tab. 5.5 Sounds
5.3 How the cooktop extractor
works
Depending on the model you purchased, the cooktop extractor
can be operated as an exhaust air or a recirculating air version.
Exhaust air mode
The air suctioned away is purified by the grease filter and
expelled into the open air via a duct system.
The exhaust air must not be expelled into:
XO a smoke or exhaust gas flue that is in operation
XO a shaft used for the aeration of rooms where fireplaces are
installed.
If the exhaust air is to be directed into a smoke or exhaust gas
flue that is not in use, the installation must be checked and
approved by the responsible heating engineer.
Recirculation mode
The air suctioned away is purified by the grease filter and an
activated charcoal filter and fed back into the room in which the
appliance is installed.
To prevent odours in recirculation mode, an odour filter must be
used. For hygiene and health reasons, the activated charcoal
filter must be replaced at the recommended intervals (see the
Cleaning and maintenance chapter).
i In recirculation mode, ensure sufficient ventilation and
aeration to expel humidity.
5.4 How the induction cooktop
works
An induction coil is located underneath an induction cooking
zone. If the cooking zone is switched on, this coil creates a
magnetic field that acts directly on the base of the pot thus
heating it up. The cooking zone is only indirectly heated up by
the heat emitted by the pot. Cooking zones with induction only
work if the cookware has a magnetisable base.
The induction automatically takes into account the size of the
used cookware which means that only the area in the cooking
zone covered by the base of the pot is heated up.
XXObserve the minimum pot base diameter.
5.2.4 7-segment display
Multi-function display Meaning
Fan display
1
 – 
Power levels
Power setting
Inactive
Automatic extractor function
n
Automatic after-run
Filter service
Multi-function
display
0
Time indication
e.g.
Error code
Cooking zone indicator Meaning
Cooking zone
indicator
1
 – 
Power level
Power setting
Warming level (Pure)
Warming level 1 (X Pure)
Warming level 2 (X Pure)
Warming level 3 (X Pure)
Pan size recognition
Inactive
Residual heat indicator
(cooking zone is switched off
but still hot)
Error
Tab. 5.3 Meaning of the 7-segment displays
5.2.5 Lighting
i The operating panel has 2 different levels of lighting
(100% and 50%).
i On principle the system adapts the lighting to the current
operating scenario. Relevant display elements are more
brightly lit and irrelevant ones are dimmed. Unavailable
functions are faded out.
Lighting Use
100% Function is active and selected
50% Function is inactive but can be selected
0% (no indicator) Function is unavailable
Tab. 5.4 Lighting
5.2.6 Sounds
i The volume of the acoustic signals can be set in the
menu (0% to 100%).
i The acoustic signal for the power button cannot be set
to 0.
i Safety-relevant acoustic signals are always emitted with
the volume at 100%.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pura at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pura in the language / languages: English as an attachment in your email.

The manual is 12,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pura

Bora Pura User Manual - German - 60 pages

Bora Pura User Manual - Dutch - 64 pages

Bora Pura User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info