714374
37
Zoom out
Zoom in
Previous page
1/44
Next page
EN
37
Cleaning and Maintenance
www.bora.com
Finally, dry the pan supports carefully with a clean
cloth.
Before reassembling the flame openings, burner heads
and burner caps must be completely dry.
Put the burner parts back together again.
Position the burner head [2] correctly on the gas
outlet.
Ensure that the safety thermocouple [4] and the
electric igniter [3] are positioned in the correct
opening.
Position the burner cap [1] so that it fits perfectly,
sitting straight on the burner head [2].
If burner parts are not positioned correctly, the electric
igniter will not work.
Place the pan support straight on the gas burner so it
fits perfectly.
Put the gas burner into operation (see the Operation
chapter).
7.4 Cleaning the control knobs
12
3
Fig. 7.3 Pull out the knob ring
[1] Knob casing
[2] Touch surface
[3] Knob ring
7.4.1 Cleaning the knob ring
The knob ring can only be cleaned by hand.
Remove the knob ring from the knob housing.
Use a cleaner and degreaser in one.
Rinse the knob ring with hot water.
Clean the knob ring with a soft brush.
Rinse the knob ring well after cleaning.
Dry the knob ring carefully.
Place the dry knob ring back on the knob housing.
Make sure it is positioned correctly (0 position).
If necessary, turn the knob ring to the 12 o’clock
position (= 0 position).
7.4.2 Cleaning the touch surface and the
knob housing
Remove the knob ring.
Clean the touch surface and the knob housing with a
soft, damp cloth.
Dry the touch surface and the knob housing carefully.
Place the knob ring back on the knob housing.
INFO If the knob ring has not been fitted correctly, a
segment rotating clockwise is displayed in the
central control knob display ( ).
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pro PKG11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pro PKG11 in the language / languages: English as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pro PKG11

Bora Pro PKG11 User Manual - German - 44 pages

Bora Pro PKG11 User Manual - Dutch - 44 pages

Bora Pro PKG11 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info