714374
26
Zoom out
Zoom in
Previous page
1/44
Next page
EN
26
Installation
www.bora.com
Changing the gas burner nozzle in the gas
burner
INFO The gas type and pressure may only be changed
by a certified engineer or BORA service
technician. He/she also assumes responsibility
for the proper gas installation and commissioning.
1
2
3
4
5
6
Fig. 5.25 Gas burner structure
[1] Burner cap
[2] Burner head
[3] Electric igniter
[4] Safety thermocouple
[5] Burner housing
[6] Gas burner nozzle
Remove the pan support.
Remove the burner cap [1] from the burner head [2].
Remove the burner head [2] from the gas outlet.
1
2
Fig. 5.26 Cooktop burner with gas burner nozzle
[1] Gas burner
[2] Gas burner nozzle
Unscrew the gas burner nozzle [2] from the gas burner [1]
Screw on the corresponding nozzle for the gas type to
be used into the gas burner [2].
Put the burner parts back together again.
Position the burner head [2] correctly on the gas
outlet.
Ensure that the safety thermocouple [4] and the
electric igniter [3] are positioned in the correct
opening.
Position the burner cap [1] so that it fits perfectly,
sitting straight on the burner head [2].
If burner parts are not positioned correctly, the electric
igniter will not work.
Place the pan support straight on the gas burner so it
fits perfectly.
Set the gas type in the configuration menu (see point
5.8.4 Configuration of gas type and gas pressure).
Affixing the nozzle set nameplates
Affix the nozzle set nameplates supplied in the scope
of delivery to the space provided above the nozzle set
nameplate on the bottom of the cooktop (see fig. 5.27)
and on the back of these operating and installation
instructions.
Fig. 5.27 Axing the nozzle set nameplates
5.6.4 Nozzle table
INFO The nozzles regulate the maximum gas
throughflow for each burner and gas type/
pressure.
INFO The gas cooktop is set by default to natural gas
G20/20mbar (pre-assembled).
INFO Use only stamped and approved nozzles.
INFO The gas type and pressure may only be changed
by a certified engineer or BORA service
technician. He/she also assumes responsibility
for the proper gas installation and commissioning.
The stamp on the nozzles corresponds to the values in
the nozzle table and can be found either on the top or
side of the nozzles.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pro PKG11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pro PKG11 in the language / languages: English as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pro PKG11

Bora Pro PKG11 User Manual - German - 44 pages

Bora Pro PKG11 User Manual - Dutch - 44 pages

Bora Pro PKG11 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info