714374
17
Zoom out
Zoom in
Previous page
1/44
Next page
EN
17
Installation
www.bora.com
5 Installation
Observe all safety and warning information (see the
Safety chapter).
Follow the enclosed manufacturer’s information.
Please note the local regulations and connection
requirements applicable to gas cooktops.
Before connecting the appliance, check that the
appliance settings comply with local connection
requirements (gas type and pressure).
INFO Ensure sufficient ventilation.
INFO The cooktop must not be installed above cooling
devices, dishwashers, stoves, ovens, washing
machines or driers.
INFO The contact surface of the worktops and wall
sealing strips must be made of a heat-resistant
material (up to approx. 100 °C).
INFO Worktop cut-outs must be moisture-sealed using
suitable means or, where necessary, fitted with a
thermal insulator.
INFO Control knobs must only be connected to the
cooktop extractor connections provided.
INFO Taking into account the applicable valid
regulations, the cooktop must be connected to
the gas line with an upstream stopcock.
INFO The gas supply pipe can be connected after the
gas cooktop has been installed.
INFO The hose connection must be laid in such a way
that it is not subject to deformation, buckling or
abrasion.
INFO The stopcock and gas supply pipe connections
must be accessible.
INFO It must be possible to inspect the entire length of
the hose line once installed.
INFO Only compatible connection pieces are to be used
for the hose line.
INFO The pressure regulator must correspond to the
set gas type and set gas pressure and must meet
local and legal requirements.
INFO The gas connection hose line must not come into
contact with smoke or the flue outlet of an oven.
INFO The hose line must not come into contact with hot
surfaces on the cooktop or other devices.
INFO The gas hose must be inspected every 5 years
and replaced if necessary. The gas hose must
meet the requirements of EN14800.
5.1 Checking the delivery
Name Quantity
Cooktop 1
Control knob 2
Operating and installation instructions 1
Cooktop mounting screws 4
Height adjustment plate set 1
Cooktop mounting straps 4
Control knob cable 2
Automatic extraction system cable 1
Glass ceramic cleaning instructions 1
Glass ceramic scraper 1
Cast-iron grate 2
Nozzle set G20/20 mbar natural gas PKGDS2020 1
Flexible gas connection hose, length 500 mm,
1/2” external thread (EN 14800)
1
Cylindrical/conical transition piece 1
Seal 1
Tab. 5.1 Scope of delivery
Check the delivery for damage and make sure it is
complete.
If there are any missing or damaged parts, please
notify BORA After Sales Service immediately.
Do not under any circumstances install parts which are
damaged.
Dispose of transport packaging in the proper manner
(see the Decommissioning and Disposal chapter).
5.2 Tools and aids
The following tools are required for the correct installation
of the cooktop:
Pencil
Measuring tool
Drill or cordless drill with 50 mm Forstner bit
Screwdriver/Torx screwdriver 20
Silicone sealant for sealing cutting surfaces
5.3 Assembly instructions
5.3.1 Safety clearances
Maintain the following safety clearances:
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pro PKG11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pro PKG11 in the language / languages: English as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pro PKG11

Bora Pro PKG11 User Manual - German - 44 pages

Bora Pro PKG11 User Manual - Dutch - 44 pages

Bora Pro PKG11 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info