714360
18
Zoom out
Zoom in
Previous page
1/36
Next page
EN
18
Installation
www.bora.com
≥70
Ø50 ±0,5
370
80-140
Fig. 5.8 Drill template
1
2
3
Fig. 5.9 Fitting the control knob
Remove the knob ring [1].
Unscrew the fixing nut [2].
Push the control knob [3] through the hole in the panel
from the front.
Screw the fixing nut [2] onto the control knob from the
rear and tighten a little.
Use the marking to align the control knob [3] vertically
in the 12 o’clock position.
Tighten the fixing nut [2].
Slot the knob ring [1] onto the control knob [3].
Cut-out dimensions when installing cooktops or cooktops
and the cooktop extractor next to each other:
Cooktops/cooktop extractor B in mm
1/0 346
1/1 457
2/1 828
3/2 1310
4/2 1681
Tab. 5.3 Cut-out dimensions for surface mounting of appliance
combinations
5.5 Installing the cooktop
INFO Clearance of one millimetre should be planned
between the built-in appliances.
INFO A clearance of two millimetres should be planned
around the built-in appliances.
INFO It is recommended to install a mounting rail
between adjacent cooktops (mounting rail PZMS
available as an accessory).
INFO Alternatively, the cooktop can be fitted rotated by
180°.
5.5.1 Installing the control knob in the floor
unit front panel
INFO Pre-drill the bore holes to prevent tearing out the
fixed front panel.
Fig. 5.7 Installed control knob and cooktop
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pro PKCH2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pro PKCH2 in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pro PKCH2

Bora Pro PKCH2 Additional guide - English, German - 2 pages

Bora Pro PKCH2 User Manual - German - 36 pages

Bora Pro PKCH2 Additional guide - Dutch - 2 pages

Bora Pro PKCH2 User Manual - Dutch - 36 pages

Bora Pro PKCH2 Additional guide - French - 2 pages

Bora Pro PKCH2 User Manual - French - 36 pages

Bora Pro PKCH2 Additional guide - Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info