714357
30
Zoom out
Zoom in
Previous page
1/36
Next page
EN
30
Cleaning and Maintenance
www.bora.com
7 Cleaning and
Maintenance
Observe all safety and warning information (see the
Safety chapter).
Follow the enclosed manufacturer’s information.
When conducting scheduled cleaning and
maintenance, ensure that the cooktop and cooktop
extractor are fully switched off and cooled so as to
prevent injury (see the Operation chapter).
Regular cleaning and maintenance ensures long
service life of the product and optimal function.
Adhere to the following cleaning and maintenance
cycles:
Component Cleaning cycle
Control knob immediately after soiling with
conventional detergents
Cooktop
Tab. 7.1 Cleaning cycles
7.1 Cleaning agents
INFO Due to the use of aggressive cleaning agents and
abrasion caused by the pot bases the surface will
become damaged and dark stains will occur.
To clean the cooktop, you need a special glass ceramic
scraper and suitable cleaning agents.
Never use steam cleaners, abrasive sponges, scouring
pads or chemically aggressive cleaning agents (e.g.
oven cleaner spray).
Make sure that the cleaning agent does not contain
any sand, soda, acids, lyes or chloride.
7.2 Looking after the cooktop
Never use the cooktop as a work or storage surface.
Do not push or pull cookware over the cooktop.
Always lift pots and pans.
Keep the cooktop clean.
Remove any dirt immediately.
Only use cookware suitable for glass ceramic cooktops
(see Appliance description chapter).
7.3 Cleaning the cooktop
Make sure that the cooktop is switched off (see the
Operation chapter).
Wait until all cooking zones are cold.
Remove all coarse dirt and food residues from the
cooktop using a glass ceramic scraper.
Apply the cleaning agent to the cold cooktop.
Spread the cleaning agent using kitchen roll or a clean
cloth.
Wipe the cooktop clean with a damp cloth.
Dry the cooktop with a clean cloth.
If the cooktop is hot:
Remove stubborn residues of plastic, aluminium foil,
sugar or sweet dishes from the hot cooking zone
immediately using a glass ceramic scraper to prevent
burning.
Heavy soiling
Remove heavy soiling and marks (limescale marks,
mother-of-pearl-like shiny marks) using cleaning
products while the cooktop is still warm.
Wipe off food that boils over with a damp cloth.
Remove any remaining dirt with the glass ceramic
scraper.
Always remove any seeds, crumbs or similar that fall onto
the cooktop during cooking immediately to prevent the
surface getting scratched.
Any changes in colour or glossy spots are not damage to
the cooktops. They do not affect the functionality of the
cooktop or the stability of the glass ceramic panel.
Changes in the colour of the cooktop are the result of
residues which have not been removed and have burnt
on.
Glossy spots are the result of wear by the pan base,
especially if aluminium-based cookware or unsuitable
cleaning agents are used. These are difficult to remove.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pro PKC32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pro PKC32 in the language / languages: English as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pro PKC32

Bora Pro PKC32 Additional guide - English, German - 2 pages

Bora Pro PKC32 User Manual - German - 36 pages

Bora Pro PKC32 Additional guide - Dutch - 2 pages

Bora Pro PKC32 User Manual - Dutch - 36 pages

Bora Pro PKC32 Additional guide - French - 2 pages

Bora Pro PKC32 User Manual - French - 36 pages

Bora Pro PKC32 Additional guide - Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info