714108
25
Zoom out
Zoom in
Previous page
1/36
Next page
EN
25
Operation
www.bora.com
INFO The knob ring position for the heat retention level
is between the 12 o’clock position and the 1
o’clock position.
Turn the selector ring approximately 15° clockwise
from the 12 o’clock position until it lightly engages.
v
appears in the control knob display.
Press the touch surface on the control knob for
1 second to activate the heat retention level 1.
This is confirmed with an acoustic signal and the
symbol
,
is displayed.
Heat retention level 1 2 3
Symbol
. ; *
Temperature in °C 42 74 94
Tab. 6.2 Temperatures of heat retention levels
Increase heat retention level
Press the touch surface on the control knob a second
time for 1 second to activate heat retention level 2 (
:
).
Press the touch surface on the control knob a third
time for 1 second to activate heat retention level 3 (
*
).
This is always confirmed with an acoustic signal and
the corresponding symbol is displayed.
Reduce heat retention level
After setting heat retention level 3, pressing the touch
surface (1 second) again reduces the level by 1.
This is always confirmed with an acoustic signal and
the corresponding symbol is displayed.
Switching off heat retention level
The heat retention level activated switches off if you
select another power level
switch off the cooking zone
6.2.6 Childproofing feature
INFO The childproofing feature can only be activated or
permanently deactivated if both knob rings are at
the 12 o’clock position and no function is active.
Activating the childproofing feature
Press the touch surface of one of the control knob for
5 seconds.
An acoustic signal is heard and
L
is displayed.
The display goes blank after 10 seconds and the
childproofing feature is activated.
6.2.3 Automatic heat up function
Switching on the automatic heat up function
INFO The exact values for the heat-up time can be
found in the Device description section.
Select the desired power level (= later continuous
cooking level).
Within 3 seconds of setting the power level, press the
touch surface of the control knob for at least 1 second.
The automatic heat up function is activated and the
control knob shows an
A
in front of the continuous
cooking level selected (e.g.
A
3
).
INFO When the automatic heat up function is active,
A
is displayed.
Once the automatic heat up period has passed, the
power is reduced to the selected continuous cooking
level.
If a higher continuous cooking level is selected while
the automatic heat up function is active, the new heat-
up time is automatically valid.
6.2.4 Switching off the automatic heat up
function
The activated automatic heat up function will end
prematurely if you
reduce the power level (continuous cooking level).
set power level
9
.
activate power setting
ßp
.
activate heat retention level
v
.
switch off the cooktop.
6.2.5 Heat retention level
Activating the heat retention level
15°
Fig. 6.3 Knob ring setting for heat retention level
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pro - PKI 11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pro - PKI 11 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pro - PKI 11

Bora Pro - PKI 11 Additional guide - English, German - 2 pages

Bora Pro - PKI 11 User Manual - German - 36 pages

Bora Pro - PKI 11 Additional guide - Dutch - 2 pages

Bora Pro - PKI 11 User Manual - Dutch - 36 pages

Bora Pro - PKI 11 Additional guide - French - 2 pages

Bora Pro - PKI 11 User Manual - French - 36 pages

Bora Pro - PKI 11 Additional guide - Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info