714108
14
Zoom out
Zoom in
Previous page
1/36
Next page
EN
14
Device description
www.bora.com
Cooking zone Minimum diameter
PKI11 front back 120 mm
90 mm
Tab. 4.5 Minimum cookware diameter
Perform a magnet test, if necessary. If a magnet sticks
to the base of the utensils, they are normally induction
compatible.
Pay attention to the cookware bottom. The base of
the cookware should not show any sign of curvature.
Due to incorrect temperature monitoring of the hob
caused by the air gap between the cookware and the
temperature sensor underneath the hob, overheating
may occur. The bottom of the cookware must not have
any sharp grooves or sharp edges to avoid scratching
the cooktop.
Place the cookware (without a mat or similar) directly
onto the glass ceramic.
Noises
The following noises may occur in the cookware when
using induction cooking zones, depending on the material
and the finish of the base:
Humming may occur when using a high power
level. It decreases or disappears if the power level is
decreased.
Crackling or whistling may occur due to the bases of
cookware made of different materials (e.g. sandwich
base).
Clicking sounds may occur during electronic switching
procedures especially at low power levels.
Whirring may occur when the cooling fan is switched
on. In order to increase the service life of the
electronic system, the cooktop is equipped with a
cooling fan. The cooling fan switches on automatically
if the cooktop is used intensively. You will hear a
whirring sound. The cooling fan may continue running
after the device has been switched off.
4.3.6 Pan size recognition
The cooking zone does not work if
...
v
,
is displayed.
... If it is switched on without cookware or with
unsuitable cookware.
... the base diameter of the cookware is too small;
... if the cookware is removed from a switched on
cooking zone.
... after 10 minutes if no pan is detected. The cooking
zone then switches off automatically and can only
be switched back on after the control knob has been
turned back to the zero position.
4.3.3 Automatic heat up function
The two cooking zones are equipped with an automatic
heat up function that can be switched on and off.
A
is displayed
This function enables the cooking zone to work at full
power for a certain duration after switching on. After this
time, the power level is automatically switched back to
the power level set.
Power level Cooking duration in min:sec
1
0:40
2
01:00
3
02:00
4
03:00
5
04:20
6
07:00
7
02:00
8
03:00
Tab. 4.3 Overview of the automatic heat up function
4.3.4 Heat retention levels
The heat retention level keeps cooked foods warm.
v
appears in the control knob display.
The maximum duration for the warming function is
limited to 8 hours.
There are three different heat retention levels.
Heat retention level Symbol Temperature
1
,
42° C
2
;
74° C
3
*
94° C
Tab. 4.4 Heat retention levels
4.3.5 Suitable cookware
INFO The heating and heat through time for the base
of the cookware as well as the cooking results
are significantly influenced by the structure and
material of the cookware.
Cookware with this symbol is suitable for
induction cooktops. The cookware used for the
induction cooktop must be made of metal, feature
magnetic properties and possess a sufficient
bottom surface.
Suitable cookware is made of:
stainless steel with a magnetisable base
enamelled steel
cast iron
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pro - PKI 11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pro - PKI 11 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pro - PKI 11

Bora Pro - PKI 11 Additional guide - English, German - 2 pages

Bora Pro - PKI 11 User Manual - German - 36 pages

Bora Pro - PKI 11 Additional guide - Dutch - 2 pages

Bora Pro - PKI 11 User Manual - Dutch - 36 pages

Bora Pro - PKI 11 Additional guide - French - 2 pages

Bora Pro - PKI 11 User Manual - French - 36 pages

Bora Pro - PKI 11 Additional guide - Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info