711234
37
Zoom out
Zoom in
Previous page
1/44
Next page
EN
37
Cleaning and maintenance
www.bora.com
Place the cover flap [3] on the side next to the exhaust
opening [1].
Allow the cover flap [3] to slide vertically into the guide
[2].
Gently press the narrow side of the cover flap [3] from
the top until you feel it slot into place.
Make sure the cover flap [3] is correctly fitted.
INFO If the cover flap is not fully in the slot after fitting,
it cannot be closed properly.
INFO If the grease filter or the cover flap have not been
properly fitted, error message E0 12 or E0 13
appears on the control knob display
(see Troubleshooting section).
8.2.4 Removing the maintenance tray
INFO The maintenance tray cannot be removed in the
following installation scenarios. Single installation,
adjacent 2nd extractor, adjacent wok cooktop.
INFO To remove the maintenance tray, the grease filter
and the filter tray must first be removed.
2 1
Fig. 8.5 Removing the maintenance tray
[1] Maintenance tray
[2] Locking
To unlock the maintenance tray [1], twist the two
locking levers [2] 90° outwards.
Remove the maintenance tray [1] from the cooktop
extractor.
Lift the cover flap [1] off upwards.
Reach into the opening in the cooktop extractor and
remove the grease filter [2] and the filter tray [3].
8.2.3 Fitting the cover flap, the grease filter
and the filter tray
Fig. 8.3 Fitting the components
Fit the filter tray into the exhaust opening.
Insert the grease filter into the exhaust opening.
Make sure the grease filter sits correctly in the opening
in the casing.
Inserting the cover flap:
1 2 3
Fig. 8.4 Inserting the cover ap
[1] Exhaust opening
[2] Guided tour
[3] Cover flap
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pro - PKASAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pro - PKASAB in the language / languages: English as an attachment in your email.

The manual is 8,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pro - PKASAB

Bora Pro - PKASAB Additional guide - English, German - 2 pages

Bora Pro - PKASAB User Manual - German - 44 pages

Bora Pro - PKASAB Additional guide - Dutch - 2 pages

Bora Pro - PKASAB User Manual - Dutch - 48 pages

Bora Pro - PKASAB Additional guide - French - 2 pages

Bora Pro - PKASAB User Manual - French - 48 pages

Bora Pro - PKASAB Additional guide - Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info