711234
34
Zoom out
Zoom in
Previous page
1/44
Next page
EN
34
Operation
www.bora.com
Permanently deactivating the childproofing
feature
INFO The childproofing feature can only be permanently
deactivated if the knob ring is in the 12 o’clock
position.
Press the touch surface of the control knob for
5 seconds.
An acoustic signal can be heard and the display on the
control knob switches to
L
. After 10 seconds, another
acoustic signal sounds and the display goes out. The
childproofing feature is deactivated.
Deactivating the childproofing feature for a
cooking session
Turn the knob ring from the 12 o-clock position to a
power level.
L
appears in the control knob display.
Press the touch surface of the control knob for
5 seconds.
An acoustic signal can be heard and the control knob
display shows the power level selected.
The childproofing feature is only deactivated for this
cooking session and you can set the power level you
want.
The childproofing feature is reactivated next time you
switch on.
7.2.6 Crush protection
The electrical cover flap on the cooktop extractor has
crush protection.
If the cover flap is blocked while it is opening or
closing, the movement is stopped automatically.
The cover flap moves back to its starting position.
End
is displayed on the control knob.
Remove the foreign body which is in the way.
Press the touch surface for 1 second.
The cover flap is working again.
If the cover flap is blocked three times in succession
while automatically opening or closing, the appliance
will be automatically disabled for 5 minutes.
To re-activate the appliance after 5 minutes, touch the
touch-operated area for 1 second.
7.3 Note the filter service function
If a flashing
F
is shown on the control knob display after
switching on the cooktop extractor, the service life of the
activated charcoal filter is up (for recirculation only) and
the grease filter needs thorough cleaning.
7.2.3 Switching off the cooktop extractor
Fig. 7.3 Switching o the cooktop extractor
Twist the knob ring to the 12 o’clock position. The
knob ring slots into this position and the automatic
after-run starts.
7.2.4 Automatic after-run
Once the cooktop extractor is switched off, the
automatic after-run starts.
n
appears in the control
knob display.
The cooktop extractor switches off automatically after
20 minutes and the cover flap closes.
Deactivate automatic after-run early.
Press the touch surface of the control knob for a
second. An acoustic signal can be heard and the
display switches to
0
.
The cover flap closes and the display goes out after 10
seconds.
7.2.5 Childproofing feature
The cooktop extractor has a childproofing feature to
prevent accidental switching on.
Activating the childproofing feature
INFO The childproofing feature can only be activated
if the knob ring is in the 12 o’clock position and
there are no active functions.
Press the touch surface of the control knob for
5 seconds.
An acoustic signal can be heard and the display on the
control knob switches to
L
. After 10 seconds, another
acoustic signal sounds and the display goes out. The
childproofing feature is activated.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pro - PKASAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pro - PKASAB in the language / languages: English as an attachment in your email.

The manual is 8,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pro - PKASAB

Bora Pro - PKASAB Additional guide - English, German - 2 pages

Bora Pro - PKASAB User Manual - German - 44 pages

Bora Pro - PKASAB Additional guide - Dutch - 2 pages

Bora Pro - PKASAB User Manual - Dutch - 48 pages

Bora Pro - PKASAB Additional guide - French - 2 pages

Bora Pro - PKASAB User Manual - French - 48 pages

Bora Pro - PKASAB Additional guide - Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info