711233
28
Zoom out
Zoom in
Previous page
1/44
Next page
EN
28
Installation
www.bora.com
INFO The Home In contact must be bridged if this is not
used (bridged on delivery).
For connections to the Home In connection clamp, no
ferrules may be used.
Clamp the connection cable in the strain relief clamp
[4] in accordance with the wire cross section used.
INFO If external switching devices are connected both
to the Home In and Home Out interfaces, both
cables should be secured with the strain relief
claim [4].
Remove the relevant snap-out element [2] in the
plastic housing of the universal control unit.
1
2
Fig. 6.42 Home Out contacts with strain relief
[1] Strain relief clamp
[2] Snap-out element for cable feed
Check the correct installation, as well as the firm
positioning of the connection cables.
Close the cover on the universal control unit.
Make sure that the cable is not damaged.
Switch on the main switch/automatic circuit breaker.
6.11 Establishing communication and
power connection
Observe all safety and warning information (see the
Safety section).
Observe all national and regional laws and regulations
as well as the supplementary regulations of the local
utility companies.
The plug for the power supply must be accessible
following installation.
If the power supply cable has been damaged this must
be replaced.
6
5
3
2
1
4
9
UFH
35
120
20
Fig. 6.40 Stripping lengths and installation position for
connection cable
[1] Stripped wire end
[2] Insulated wire
[3] Jacketed cable
[4] Strain relief clamp
[5] Cable feed snap-out element
[6] Universal ferrite sleeve (UFH)
Please adhere to the maximum stripping length of
9 mm on the stripped wire end [1].
Please adhere to the maximum stripping length of
26 mm on the insulated wire [2].
Installing the external switch device
Depending on the type of switch device, connect the
connection cables to either the Home In or the Home Out
connection clamp.
Adhere to the connection diagram when connecting
Home In and Home Out.
Home
In
Home
Out
X 7.1
X 7.2
X 6.1
X 6.2
Fig. 6.41 Connection diagram for the external switch contacts
Connect the cable for the relevant contact to the
switch contact clamp in accordance with the relevant
connection diagram (see fig. Connection diagram for
the external switch contacts).
In order to connect the Home In interface, the installed
bridge must be removed.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pro - PKAS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pro - PKAS in the language / languages: English as an attachment in your email.

The manual is 8,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pro - PKAS

Bora Pro - PKAS Additional guide - English, German - 2 pages

Bora Pro - PKAS User Manual - German - 44 pages

Bora Pro - PKAS Additional guide - Dutch - 2 pages

Bora Pro - PKAS User Manual - Dutch - 48 pages

Bora Pro - PKAS Additional guide - French - 2 pages

Bora Pro - PKAS User Manual - French - 48 pages

Bora Pro - PKAS Additional guide - Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info