711233
20
Zoom out
Zoom in
Previous page
1/44
Next page
EN
20
Installation
www.bora.com
Securing the cooktop extractor
INFO The cooktop extractor is secured using the four
mounting clamps provided, for which there are 4
alternative positions on the holding plate.
23 1
Fig. 6.13 Push on mounting clamps
[1] Alternative position for mounting clamp
[2] mounting clamp
[3] Cooktop extractor
Push the mounting clamps [2] into the holders
provided on the cooktop extractor [3] or the alternative
positions on the holding plate [1].
Fig. 6.14 Tighten the mounting clamps
Use a Torx 20 screwdriver to tighten the mounting
clamps slightly from underneath.
Verify that the alignment is correct.
4
3
2
1
Fig. 6.12 Mounting clamp on left (surface mounting)
[1] Worktop thickness labelling (in mm)
[2] Cut mark (4x)
[3] Fastening lugs (2 on each side)
[4] Marking for surface mounting
INFO The symbols on the mounting clamps show which
side to use for surface mounting and for flush-
mounting.
INFO The labels shows the cutting mark to go with the
worktop thickness.
If necessary, shorten the mounting clamps in line with
the worktop thickness.
To do this, cut the mounting clamps at the appropriate
cut marks using a cutter.
Depending on the installation type, twist the mounting
clamps to the left or right (flush mounting or surface
mounting).
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pro - PKAS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pro - PKAS in the language / languages: English as an attachment in your email.

The manual is 8,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pro - PKAS

Bora Pro - PKAS Additional guide - English, German - 2 pages

Bora Pro - PKAS User Manual - German - 44 pages

Bora Pro - PKAS Additional guide - Dutch - 2 pages

Bora Pro - PKAS User Manual - Dutch - 48 pages

Bora Pro - PKAS Additional guide - French - 2 pages

Bora Pro - PKAS User Manual - French - 48 pages

Bora Pro - PKAS Additional guide - Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info