714384
27
Zoom out
Zoom in
Previous page
1/36
Next page
EN
27
Cleaning and Maintenance
www.bora.com
8 Cleaning and
Maintenance
Observe all safety and warning information
(see the Safety section).
INFO Clean the stainless steel surfaces in the
polishing direction only.
Regular cleaning and maintenance ensures the
longevity of the product and optimal function.
Adhere to the following cleaning and maintenance cycles:
Component Cleaning cycle
Cooktop extractor
interior and surface
After cooking very greasy dishes;
at least once a week
Cover flap, rotating
mechanism and stainless
steel grease filter
After cooking very greasy dishes;
at least once a week
Activated charcoal
filter (with recirculation only)
Replace if odours have built up
or the service life has expired
(see the operating instructions
for the activated charcoal filter)
Control knob Immediately after every soiling
Tab. 8.1 Cleaning cycles
8.1 Cleaning agents
INFO
Due to the use of aggressive cleaning agents and
abrasion caused by the pot bases the surface
will become damaged and dark stains will occur.
Never use steam cleaners, abrasive sponges, scouring
pads or chemically aggressive cleaning agents
(e.g. oven cleaner spray).
Make sure that the cleaning agent does not contain
any sand, soda, acids, lyes or chloride.
8.2 Cleaning the cooktop extractor
Grease particles and limescale residues from cooking
vapours can settle on the surface and in the extraction
system.
Make sure that the cooktop extractor is switched off
(see the Operation section).
Remove the cover flap, rotating mechanism and
stainless steel grease filter prior to cleaning.
Clean the cooktop extractor in accordance with the
cleaning cycles.
Clean the surfaces using a soft, damp cloth, detergent
or a mild window cleaning agent.
Soften dried on dirt using a damp cloth (do not scrape
it off!).
8.2.1 Removing the cover flap, rotating
mechanism and stainless steel grease
filter
1
Fig. 8.1 Removing the cover ap
[1] Cover flap
[2] Tappet
[3] Control wheel
Use the control wheel [3] to turn the cover flap [1] to
the middle setting.
Lift the cover flap off upwards.
INFO When removing the cover flap, ensure that it
is at an angle of approximately 45° so that
the tappet [2] glides cleanly out of the rotating
mechanism.
Fig. 8.2 Removing the rotating mechanism
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora PL540E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora PL540E in the language / languages: English as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora PL540E

Bora PL540E User Manual - German - 36 pages

Bora PL540E User Manual - Dutch - 36 pages

Bora PL540E User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info