714384
8
Zoom out
Zoom in
Previous page
1/36
Next page
EN
8
Safety
www.bora.com
Check the device for visible damages
before installing it.
Do not install a damaged device.
A damaged device may put your safety at
risk!
Repair and maintenance work may only be
carried out by specialists authorised by the
manufacturer.
2.4 Safety instructions, disassembly
and disposal
Disassembly of the device may only be carried
out by trained personnel who are familiar with
and comply with common national regulations
and supplementary regulations of the local
utility companies.
Work on electrical parts may only be carried
out by trained electrical personnel.
DANGER!
Danger of electric shock!
Disconnecting the device incorrectly
from the mains poses a risk of
electric shock.
Safely disconnect the device from
the mains using miniature or auto-
matic circuit breakers, fuses or
contactors.
Use a suitable measuring device
to ensure that the device is
de-energised.
DANGER!
Risk of suffocation!
Parts of the packaging (e.g. lms,
polystyrene) can be fatal to children.
Store packaging materials away
from the reach of children.
Dispose of packaging correctly
and promptly.
regulations of the local utility companies.
Work on electrical parts must only be carried
out by trained electrical personnel.
The electrical safety of the device is only
guaranteed if it is connected to a properly
installed protective conductor system. Make
sure that these basic safety precautions have
been taken.
Cooktop extractor
DANGER!
Risk of poisoning caused by
combustion gases!
When the cooktop extractor is used
for exhaust operation, it draws in air
from the room it is installed in and
from neighbouring rooms. Without
sucient air, negative pressure will
occur. Toxic gases could be drawn
out of the chimney or extraction
ducting on a replace that depends
on the room air and back into the
room.
Make sure there is always enough
air supply.
Use technical safety measures
(e.g. window contact switch, low
pressure warning device) and have
them approved by a qualified
expert (certified chimney-sweep).
DANGER!
Risk of electric shock!
The electronic unit can contain
residual charge and cause an
electric shock.
Do not touch exposed contacts on
the electronic unit.
DANGER!
Risk of electric shock!
Incorrect stripping of the connection
cable to external switching devices
results in a risk of electric shock.
Ensure that the connection cable
is secured with the strain relief
clamp within the universal control
unit.
Ensure that the stated stripping
lengths are adhered to.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora PL540E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora PL540E in the language / languages: English as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora PL540E

Bora PL540E User Manual - German - 36 pages

Bora PL540E User Manual - Dutch - 36 pages

Bora PL540E User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info