714380
14
Zoom out
Zoom in
Previous page
1/28
Next page
EN
14
Device description
www.bora.com
Power level
v 1 2 3 4 5 6
Switch off after
hours:minutes
2:00 8:40 6:45 5:15 4:20 3:30 2:45
Power level
7 8 9
Switch off after
hours:minutes
2:20 1:45 1:30
Tab. 4.5 Overview of the safety shut-down
Switch the cooking zone back on (see Operating
control) if you want to put the cooking zone back into
operation.
4.4.3 Cooking zone overheating protection
All induction coils plus the cooling elements of the
electronics are equipped with overheating protection.
Before the induction coils and/or cooling elements
overheat, the overheating protection will initiate one of
the following measures:
The power setting
P
automatically switches to power
level
9
after 10 minutes. The cooking zone indicator
P
switches to
9
.
The set power level is reduced.
The cooking zones switch off automatically
(see safety shut-down of the cooking zones).
4.4.4 Childproofing feature
The childproong feature prevents the cooktop from
being switched on accidentally. The childproong feature
can only be activated when the cooktop is switched on
and all cooking zones are switched o (see the Operation
chapter).
Place the cookware (without a mat or similar) directly
onto the glass ceramic.
Noises
The following noises may occur in the cookware when
using induction cooking zones, depending on the material
and the finish of the base:
Humming may occur when using a high power level. It
decreases or disappears if the power level is decreased.
Crackling or whistling may occur due to the bases of
cookware made of different materials (e.g. sandwich
base).
Clicking sounds may occur during electronic switching
procedures especially at low power levels.
Whirring may occur when the cooling fan is switched
on. In order to increase the service life of the
electronic system, the cooktop is equipped with a
cooling fan. The cooling fan switches on automatically
if the cooktop is used intensively. You will hear a
whirring sound. The cooling fan may continue running
after the device has been switched off.
4.3.6 Pan size recognition
The cooking zone does not work
v
is shown in the display.
If it is switched on without cookware or with unsuitable
cookware.
If the base diameter of the cookware is too small.
If the cookware is removed from a cooking zone that is
switched on.
If the cooking zone does not detect a pot for 10
minutes, it switches off automatically and can only
be switched back on after the control knob has been
turned back to the zero position.
4.4 Safety devices
4.4.1 Residual heat display
INFO While
H
is displayed in the cooking zone
indicator (residual heat display), do not touch
the cooking zone or place any heat-sensitive
objects on top of it. Risk of burns and fire!
After switching it off, the cooking zone remains hot.
H
is displayed in the cooking zone indicator (residual heat
display). The cooking zone indicator will go out after
sufficient cooling time (temperature < 60 °C).
4.4.2 Safety shut-down of the cooking zone
Each cooking zone is switched off automatically when the
cooking zone in the power level exceeds the maximum
operating duration. The cooking zone indicator then
alternates between displaying
H
(residual heat display)
and
0
.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora PI11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora PI11 in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora PI11

Bora PI11 User Manual - German - 28 pages

Bora PI11 User Manual - Dutch - 28 pages

Bora PI11 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info