714375
21
Zoom out
Zoom in
Previous page
1/28
Next page
EN
21
Operation
www.bora.com
6 Operation
Observe all safety and warning information during
operation (see the Safety section).
INFO The cooktop may only be operated when
the stainless steel grease filter of the cook-
top extractor is installed (see operating
instructions for cooktop extractor).
INFO Clean the cooking zone before using the
cooktop for the first time (see the Cleaning
chapter).
6.1 Switching cooktop on/off
Fig. 6.1 Push and pull control knob
6.1.1 Switching on the cooking zone
Push and turn the control knob to power level
1
to
switch on the cooking zone.
The operating indicator light is active.
Adjusting the power level
Turn the control knob to the desired power level.
6.1.2 Switching on the power setting
INFO Both cooking zones are equipped with a
power-enhancing power setting.
If a cooking zone is operated at power setting
P
, the other
cooking zones can be operated at a maximum power level
of
5
.
If the power setting is increased to
5
, the power level will
switch back to
P
.
Press and turn the control knob past power level
9
until the power setting
P
is shown on the cooking zone
indicator.
After 10 minutes, the cooking zone is automatically
switched back to power level
9
.
6.1.3 Switching the power setting off early
Turn the control knob past power level
9
again.
Power level
9
is active and is shown in the cooking
zone indicator.
or
Turn the control knob to the desired power level.
The power level set is active and is shown in the
cooking zone indicator.
6.1.4 Switching off the cooking zone
INFO If a cooking zone indicator shows
H
, the
cooking zone is still hot.
INFO Turn the cooking zone off after use. Do not rely
on the pan size recognition.
Turn the control knob to power level
0
to switch off the
cooking zone.
The operating indicator light is inactive.
The cooktop is switched off when there are no longer
any active cooking zones.
Pay attention to the residual heat display (see the
Device Description chapter).
6.1.5 Bridging function
If the bridging function is active, both cooking zones
will operate at the same time on the same cooking
zone.
If the bridging function is activated, the power setting
P
cannot be used.
Switching on the bridging function
Press and simultaneously turn both control knobs to
the left to the symbol
A
.
Release both control knobs.
Then turn the left control knob again to power level
9
.
Set the desired power level with the right control knob.
The bridge symbol
%
appears in the front cooking zone
indicator.
The selected power level (for both cooking zones)
appears in the rear cooking zone indicator.
The power levels of both cooking zones can now be
regulated at the same time with the right control knob.
Switching off the bridging function
Turn both control knobs to power level
0
; the bridging
function and the cooktop are switched off.
6.1.6 Automatic heat up function
Switching on the automatic heat up function
Press and turn the control knob for the desired cooking
zone to the left to the symbol
A
.
Within 5 seconds, select the desired power level
(continuous cooking stage), which should be used to
continue the cooking session after the end of the auto-
matic heat up function.
The cooking zone indicator will display the symbol
A
to
show that the automatic heat up function is activated
as well as the continuous cooking stage set, for
example
5
.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora PFI11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora PFI11 in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora PFI11

Bora PFI11 User Manual - German - 28 pages

Bora PFI11 User Manual - Dutch - 28 pages

Bora PFI11 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info