714378
14
Zoom out
Zoom in
Previous page
1/28
Next page
EN
14
Installation
www.bora.com
5 Installation
Observe all safety and warning information
(see the Safety chapter).
Follow the enclosed manufacturer‘s information.
INFO The cooktop must not be installed above
cooling devices, dishwashers, stoves, baking
ovens, washing machines or driers.
INFO The contact surface of the worktops and wall
sealing strips must be made of a heat-resistant
material (up to approx. 100 °C).
INFO Worktop cut-outs must be moisture-sealed
using suitable means or, where necessary,
fitted with a thermal insulator.
5.1 Checking the deliverables
Name Quantity
Control box adjustment plates 6
Control knobs 2
Operating and installation instructions 1
Fixing nuts 2
Cooktop mounting screws 4
Control box fixing screws 2
Drilling template 1
Height adjustment plate set 1
Allen key 1
Cooktop 1
Power level sleeve 2
Mounting bracket 1
Cooktop mounting straps 4
Cleaning instructions for glass ceramic 1
Glass ceramic scraper 1
Tab. 5.1 Scope of delivery
Check the scope of delivery for damage and make sure
it is complete.
If there are any missing or damaged parts, please
notify BORA After Sales Service immediately.
Do not under any circumstances install parts which are
damaged.
Dispose of transport packaging in the proper manner
(see the Decommissioning and Disposal chapter).
5.2 Tool and aids
The following tools are required for the correct installation
of the cooktop:
Pencil
Drill or cordless drill with Forstner bit Ø 30 mm
Drilling template (included in scope of delivery)
Phillips screwdriver Z2
Silicone sealant for sealing cutting surfaces
5.3 Assembly instructions
5.3.1 Safety distances
Maintain the following safety distances:
1
3
2
Fig. 5.1 Minimum distance
[1] Minimum distance of 50 mm at the back from of the
worktop cut-out to the rear edge of the worktop.
[2] Minimum distance of 50 mm from the left and right of
the worktop cut-out to the adjacent cabinet or wall.
For ergonomic reasons and to ensure efficient cooktop
extraction, a minimum distance of 300 mm is recommended.
[3] Minimum distance of 700 mm between the worktop and the
wall unit. A minimum distance of 1000 mm is recommended
for ergonomic reasons.
5.4 Cut-out dimensions
Preparing the worktop
Create the worktop cut-out taking into account the
specified cut-out dimensions.
Make sure that the cutting surfaces of the worktops
are properly sealed.
Comply with the instructions of the worktop
manufacturer.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora PCH2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora PCH2 in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora PCH2

Bora PCH2 User Manual - German - 28 pages

Bora PCH2 User Manual - Dutch - 28 pages

Bora PCH2 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info