714386
33
Zoom out
Zoom in
Previous page
1/64
Next page
EN
33
Operation
www.bora.com
Fig. 6.1 Standard display after switching on
INFO The menu button does not appear after switching
on if there is still residual heat in one of the
cooking zones.
INFO When the childproofing feature is active, the
lock button lights up after system start. The
standard display is only shown when it has been
deactivated (also see Childproofing feature).
INFO If
1
C
o
n
F
appears in the display after switching
on the system, the basic configuration is stil
l
incomplete and must be carried out (see Initial
operation chapter).
6.3.3 Switching off
Long press on the power button until acoustic
signal is heard
The switching off animation appears and the display
goes out.
The cooktop extractor was switched on:
The fan symbol flashes and the automatic after-run
function is started.
As soon as the after-run period is over, the switching
off animation appears and the display goes out.
The cooktop was switched on:
In the case of previously active and still hot cooking
zones, the residual heat symbol lights up in signal
red and
H
is displayed.
The display goes out when no more residual heat is
present.
INFO The system can be switched off at any time: Long
press on the power button
INFO In recirculation mode the recirculated air affects
the gas cooktop.
If the gas flame goes out, is excessively affected
by the extractor and/or the flame is not as it
should be (e.g. soot production, flame blowback,
etc.), the return flow aperture must be enlarged.
6.2 Touch control
INFO The system recognises 3 different touch
commands. It differentiates between brief
touches (tap), longer contact (long press) and
vertical swiping movements with your finger
(swipe).
Touch command applicable to Time
(contact)
Tap (touch briefly) Buttons + slider 0.065 – 0.95 s
Long press (hold down) Buttons + slider 1 – 8 s
Swipe (vertical movement) Slider 0.15 – 8 s
Tab. 6.1 Touch control
If touch commands do not work or are not working
properly, the following should be taken into account:
Tap the touch zones with only one finger.
Ensure that no other parts of your hand are touching
the operating panel when using the controls.
Keep the contact area as small as possible when using
the touch zones.
Make sure that your fingers are clean and dry before
using the touch controls.
6.3 Operating the system
6.3.1 Operating principle
Operation Command
Tap a function Activating a function
Long press on a function Deactivating a function*
Swipe (slider) Setting a value (e.g. power level)
Tab. 6.2 Operating principle
6.3.2 Switching on
Long press on the power button until acoustic
signal is heard
The icon lights up and the switching-on animation is
shown in the slider.
Once the system has started successfully, the standard
display appears in the operating panel.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Classic 2.0 - C2XUM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Classic 2.0 - C2XUM in the language / languages: English as an attachment in your email.

The manual is 14,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Classic 2.0 - C2XUM

Bora Classic 2.0 - C2XUM User Manual - German - 64 pages

Bora Classic 2.0 - C2XUM User Manual - Dutch - 64 pages

Bora Classic 2.0 - C2XUM User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info