714390
21
Zoom out
Zoom in
Previous page
1/28
Next page
EN
21
Operation
www.bora.com
6.1.11 Using the timer function
You can use 2 timer functions:
Short-time timer (egg timer), no automatic switching
off of a cooking zone.
Automatic cut-off for automatically switching off a
cooking zone.
You can set a time range of between 1 and 99 minutes for
both timer functions.
If you press first, 1 minute will be pre-set as the
starting time.
If you press first, 30 minutes will be pre-set as the
starting time.
Switching off the timer signal tone
Press any sensor button on the operating panel to end
the signal tone prematurely.
Setting the short-time timer (egg timer)
You can set a short-time timer for each cooking zone.
INFO The active cooking zone indicator shows
that the short-time timer is activated.
The remaining time is displayed.
After the end of the time set, 00 will be displayed for a
few seconds on the timer display. A signal tone will sound
for a few seconds.
Prerequisite
The cooktop must be switched on.
Press the timer button or .
Each indicator light will blink and
00
will appear in the
cooking zone indicator.
Press or to set the required time.
Activation will take place within 10 seconds of the
button last being pressed.
If the cooktop is switched off with the on/off button
, the cooking zone indicator will become active and
the remaining time will be displayed.
Changing the timer settings
Press to switch on the cooktop.
The timer indicator light blinks.
Press or to set the required time.
6.1.8 Bridging function
If the bridging function is active, both cooking zones
will operate at the same time on the same cooking
zone.
Switching on the bridging function
Prerequisite
Press to switch on the cooktop.
Press both the buttons on the cooktop
(within 10 seconds).
The left cooking zone indicator will show the symbol
%
,
indicating that the bridging function is activated.
0
is
displayed in the right cooking zone indicator.
Set the desired power level with the or button
on the back cooking zone.
Switching off the bridging function
Press both buttons on the cooktop.
Both cooking zone indicators will display
0
.
Press to switch off the cooktop.
6.1.9 Automatic heat up function
Switching on the automatic heat up function
Prerequisite
The cooktop is switched on.
All cooking zones are switched off.
Press the and buttons on the cooktop.
Press the button (within 5 seconds) to select the
desired power level (continuous cooking stage), which
should be used to continue the cooking session after
the end of the automatic heat up function.
The cooking zone indicator will display the symbol
A
to
show that the automatic heat up function is activated
as well as the continuous cooking stage set, for
example
5
.
Switching off the automatic heat up function
The activated automatic heat up function will end
prematurely if you
press the button on the cooking zone.
set power level
9
.
activate the power setting
P
.
activate the heat retention level
v
.
switch off the cooktop by pressing the button.
6.1.10 Heat retention level
A cooking zone is in use.
Power level
1
is activated.
Press to set the heat retention level
v
.
The cooking zone will automatically switch off after
2 seconds.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora CKIW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora CKIW in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora CKIW

Bora CKIW User Manual - German - 64 pages

Bora CKIW User Manual - Dutch - 64 pages

Bora CKIW User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info